1 / 1
Snap-In Tube Holder / Nacvakávací držák trubek — image 1

Snap-In Tube Holder / Nacvakávací držák trubek

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EN Wall holder for tubes and handles. CZ Nástěnný držák na trubky, tyče a násady.

Rating
0 / 5
Likes
41
Downloads
135
Makes
0
Views
382
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Snap-In Tube Holder

Wall-mounted snap-in holder for tubes, rods, handles and similar round objects.

Included sizes:

  • 18 mm

  • 20 mm

  • 22.5 mm

  • 25 mm

  • 30 mm

The holder lets you snap the tube or handle in and remove it again when needed. It is useful for organizing broom handles, tool handles, rods, tubes or workshop and household accessories.

Important

The model is designed for PETG and flexible snap-in use.

Each holder has two mounting holes with a diameter of 5 mm. Use screws and wall plugs suitable for your wall material and expected load.

Recommended print settings

  • Material: PETG

  • Perimeters: 5

  • Infill: not critical if the part is mostly filled by perimeters

  • Supports: No

  • Layer height: standard settings are sufficient

  • Print orientation: as provided

Notes

Choose the holder size according to the real diameter of the tube or handle.
For rough or soft handles, allow some tolerance and test the fit before final mounting.


Nacvakávací držák trubek

Nástěnný nacvakávací držák na trubky, tyče, násady a podobné kulaté předměty.

Součástí jsou velikosti:

  • 18 mm

  • 20 mm

  • 22,5 mm

  • 25 mm

  • 30 mm

Držák umožňuje trubku nebo násadu nacvaknout a podle potřeby zase vycvaknout. Hodí se pro organizaci násad od smetáků, nářadí, tyčí, trubek nebo vybavení v dílně a domácnosti.

Důležité

Model je navržený pro tisk z PETG a pružné nacvakávací použití.

Každý držák má dva montážní otvory o průměru 5 mm. Použijte šrouby a hmoždinky odpovídající materiálu zdi a očekávanému zatížení.

Doporučené nastavení tisku

  • Materiál: PETG

  • Perimetry: 5

  • Výplň: není zásadní, pokud je díl převážně vyplněný perimetry

  • Podpěry: Ne

  • Výška vrstvy: výchozí nastavení stačí

  • Orientace tisku: dle dodaného modelu

Poznámky

Velikost držáku vyberte podle skutečného průměru trubky nebo násady.
U měkčích nebo hrubších povrchů počítejte s tolerancí a před finální montáží ověřte usazení.

Tags