GEPRC Mark 5 Receiver Mount - DJI O4 Lite (Foxeer 15cm) & Radiomaster RP3 Dual ELRS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a custom-designed TPU antenna mount for the GEPRC Mark 5 frame. It is specifically tailored for the DJI O4 Lite
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is a custom-designed TPU antenna mount for the GEPRC Mark 5 frame. It is specifically tailored for the DJI O4 Lite Air Unit setup combined with a Dual ELRS receiver system.
Key Features:
Optimized for O4 Lite: Designed for a single video antenna configuration.
Foxeer 15cm Support: The mount provides extra stability for the longer 15cm Foxeer antenna, keeping it safe from props and vibration.
Dual ELRS Slots: Dedicated positions for two ELRS antennas to ensure maximum signal coverage.
Perfect Fit: Designed to replace the stock plastic/TPU parts on the rear of the Mark 5 frame.
True Diversity Orientation: One ELRS antenna is mounted vertically and the other horizontally to minimize signal nulls and provide maximum coverage in any flight attitude.
Compatibility:
Frame: GEPRC Mark 5 (all versions)
Video Link: DJI O4 Air Unit (Lite version only)
Antennas: 1x Foxeer (15cm) + 2x ELRS T-style antennas
Print Settings
Material: TPU (95A recommended)
Walls: 3-4
Infill: 30-50% (Gyroid or Cubic)
Supports: Yes (only where touching build plate)
Специально разработанный маунт из TPU для рамы GEPRC Mark 5. Данное крепление оптимизировано под использование видеосистемы DJI O4 Lite (с одной антенной) и приемника Dual ELRS.
Особенности модели:
Специально для O4 Lite: Конструкция рассчитана на одну видео-антенну.
Поддержка Foxeer 15см: Маунт обеспечивает стабильную фиксацию длинной антенны (15 см), предотвращая её попадание в пропеллеры и снижая вибрации.
Dual ELRS: Предусмотрены два посадочных места для Т-образных антенн ELRS для обеспечения лучшего покрытия сигнала.
Идеальная посадка: Устанавливается на штатное место в задней части рамы Mark 5.
Правильное разнесение ELRS: Антенны ориентированы в разных плоскостях (одна вертикально, другая горизонтально). Это исключает «мертвые зоны» и гарантирует стабильную связь при любых маневрах и углах наклона дрона.
Совместимость:
Рама: GEPRC Mark 5 (все версии).
Видеосвязь: DJI O4 Air Unit (только версия Lite).
Антенны: 1x Foxeer (15 см) + 2x T-образные антенны ELRS.
Настройки печати (рекомендуемые)
Материал: TPU (жесткость 95A).
Стенки (Walls): 3-4 слоя.
Заполнение (Infill): 30-50% (лучше всего Gyroid или Cubic).
Поддержки: Да, только от печатного стола.
Follow the project:
Site: https://rarefpv.ru/
Telegram: t.me/rarefpv
YouTube: @RareFPV