1 / 6
TPU Feet for CoreOne Feet by @prusaguy — image 1
1 / 6

TPU Feet for CoreOne Feet by @prusaguy

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This TPU foot fits perfectly in the Prusa Core One Feet v1 by @Prusaguy

Rating
5 / 5
Likes
13
Downloads
25
Makes
1
Views
318
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Summary:

  • The feet are designed to slide into the bottom of the legs designed by @prusguy. 

  • No glue or hardware needed

Tips:

  • TPU can be finicky, and settings vary between brands, but don't be discouraged. It's more approachable than it seems!

  • The default Prusa slicer settings for TPU performed well and are a solid starting point.

  • Note: High flow nozzles may cause feeding issues due to filament flow splitting. It is recommended to use a standard nozzle for sizes under 0.6mm. Testing with a 0.4mm HF nozzle is ongoing and results will be posted when available.

  • The standard filament path was used; however, some back-and-forth manipulation was needed to properly seat the filament into the sensor/feeder. It is worth noting that bypassing the standard filament path is a common practice to reduce friction during feeding.

Settings Used:

  • Material: TPU

  • HF Nozzle: 0.6mm @ 235°C

  • Bed: Satin @ 55°C

  • Layer Height: 0.2mm

  • Chamber Temp: 40°C (A wide range has been reported in the community; TPU has also been printed successfully on an open-frame MK3.)

  • Infill: 20% Grid

  • Max Volumetric Flow: 0.6mm HF Nozzle = 12mm³/s | Standard Nozzle = 3-4mm³/s (Useful reference if custom settings are required.)

  • Brim: 5mm

Leg Installation Tips (for @prusaguy's legs):

  • Short wood screws are recommended over M3 screws for assembly. Ensure the screws are short enough and have a thread diameter that fits through the holes on the underside of the CoreOne frame.

  • Use a box or socket wrench with a small screw bit to drive the screws through the frame holes and into the top of the legs. A short bit from a standard tool kit works well for this.

Products:

Disclaimer:

  • Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.

  • JD3D is not responsible for any damage or harm caused by improper production, assembly and use.

Tags