Wheel Mount for Logitech G Pro/RS Hub

Challenge your printer and be amazed at how it can defy gravity while printing this... I've created wheel mounts for Logitech G Pro wheels, which also includes the RS QR and RS Hub. It can use 2 M6 bolts, and while washers aren't required they're recommended. They should fit snugly into the recesses.

You have a choice between horizontal and vertical orientations. Each orientation has 2 options: a compact model and another that mounts perpendicular to a 40x120 aluminum extrusion.

I've optimized the print orientation for strength to minimize the weak points caused by layer lines, so all you have to do is add a brim (if yours isn't already on by default). The default brim settings are usually good enough, so there's a chance you don't have to do a thing but import and print.

Additional supports are not necessary – the one I've included is all you'll need. You might notice that the vertical mounts give a warning about floating regions when you slice it, but from my test prints it's safe to ignore.

I wanted to challenge myself (and my printer) when I created this model. It wasn't just rotated in post, I modeled it in this orientation. I am a bit excited to share this both because the successful prints were repeatable and there are elements to this model that wouldn't work if printed in the "normal" orientation. I'm confident that you'll have success too.