Microphone Adapter 1/4-20 to 5/8-27 (modeled threads)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for mounting a 5/8-27 microphone (Shure SM7B etc.) on a 1/4-20 camera tripod or light stand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 48
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Adapter for mounting a microphone with a 5/8"-27 UNS thread (Shure SM7B and most professional mics) on a camera tripod, light stand, or boom arm with a standard 1/4"-20 UNC thread.
Specs:
Bottom: 1/4-20 UNC female - screws onto a camera tripod / light stand stud
Top: 5/8-27 UNS male - microphone screws on
Both threads are modeled (not just visual) - they print directly without tapping or inserts
Compact: ~19 x 19 x 19 mm
Knurled body for easy hand-tightening
Use case:
Designed to hold a Shure SM7B on a Raylab RL-GT3 desktop tripod stand. Tested in real use - holds the mic firmly. Should fit any 1/4"-20 stand and any 5/8"-27 microphone or shock mount.
Print settings:
Material: PLA or PLA+
Layer height: 0.16 mm (smaller layer = cleaner threads)
Infill: 30%+ (the threads carry the load)
Walls: 4 perimeters
Supports: not needed
Orientation: stand it on the wide base (5/8 thread pointing up) so layer lines run perpendicular to the load
Files included:
mic_holder_v3.0.3mf - Bambu Studio 3MF (with print profile)
mic_holder_v3.0.stl - universal STL
mic_holder.f3d - Fusion 360 source (editable, threads use the Modeled option)