Niko push button repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fix your broken Niko sixfold push button! This simple printed part replaces the weak component, saving you €80+.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Older versions of the Niko 170-60xxx switches have a fragile component that frequently breaks. This simple 3D print replaces that broken part, allowing you to easily fix the switch and get it working again.
Assembly Tip: Put something solid behind the flexible plate when pushing the pin in so you don't snap the print!
Print Settings: I printed this using PLA with a 0.4mm nozzle at a 0.15mm layer height. While this works well, using PETG and a smaller nozzle would likely improve the part's strength and overall performance.