NCASE M2 Grater Front Dual 120mm Fan Bracket with Top Screw Mounting hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can support my works here: buymeacoffee.com
Updated version: Added screw mount at the top of the bracket.
This is a custom front fan bracket for the NCASE M2 Grater, designed to mount two 120 mm fans at the front of the case.
The bracket was designed around two Noctua NF-A12x25 fans, but it should also fit most standard 120 mm case fans.
The bracket itself is 7 mm thick, giving a total thickness of 32 mm when used with standard 25 mm fans. The fan position is offset away from the PSU and pushed towards the outer front corner of the panel to maximise available airflow and clearance.
In my build, I used this together with my custom PSU mounting bracket, which offsets the PSU slightly towards the rear of the case to make enough room for 25 mm front intake fans.