Counting matching models…
Stealth Skirts für VORON 2.4 R2 - 250 / 300 / 350 UPDATE 05.05.2024: Die CAD Dateien stehen nun ebenfalls als Download zur Verfügung. Der Displaymount für das PiTFT50 V2 / V2.1 wurde ergänzt Da mir die Stealth Skirts von Maverick an…
UPDATE 05.05.2024: Die CAD Dateien wurden auf den aktuellen Stand gebracht. Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab. Der Displaymount…
The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Remix from : 67961-deburr-tool-holder-entgrater-halter thanks to Sango
G2XL (Galileo 2-Z) Stealth Skirts für VORON 2.4 R2 - 300 & 350 UPDATE 07.04.2025: Fehler in den Front Skirts links und rechts, sowohl HEX als auch Cheesegrater Design behoben. Der build-in-support war hohl und hat sich nicht korrekt…
Hier ist ein Halter für den Parkside Handentgrater zur Montage an der Werkzeugwand. Here is a holder for the Parkside hand deburrer for mounting on the tool wall.
Printed without support, which made the last-minute print quite tense. If I were to print it again, I would definitely create a support under the large arch in the middle to ensure smoother printing. However, despite the suspense, the end…
NR200 Mac-Grater Front Panel
This bracket holds two 120mm fans for the front of the case, it's about 10mm thick to avoid turbulence It pretty much maxes out the width of my mk3 printer and I also designed it to not require supports I added some slots for some magnets…
Those are brackets made for the Ncase M3 allowing you to mount front intake fans. They look good, they are well secured and make the grater pattern worth it!
Remix of PrintStructor's Cheese Grater Stealth Skirts for Trident 250/300/350 with the Clicky Clack door mod.
These files can be “used” (OpenSCAD “use” command) to parametrically create ventilated panels similar to the Apple Mac Pro Cheese Grater case. The STL examples are included for visual reference only.
Printed and approved for others. This was a fun exercise in placement and angles in openSCAD and I happily share the files for that, too - as is.
Lynx cheek rest 'Cheek grater' remix of the 10mm cheek rest by EnderSavesTheDay https://www.thingiverse.com/thing:4629645 Print standing up on the 'back' side with a brim should print fine that way Category: Toy & Game Accessories
Update 26/04/2026: - Added 15mm variant set. - The hole for these variant is 4mm deep. This require either a M3x3x5 or M3x4x5 as inserts - Replace the lower mounting hole as 2mm guide post instead. I wanted to try a different way to align…
Fits these cheap deburr tools from ebay. It has a lip, so it won't fall through. The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Simple print. Printed in das filament blue pearl.…
Note: This is a “work in progress” and could change. I wanted more ventilation for the lid of the case I'm making for the LattePanda Alpha, and I had recently seen the design for the (then) new Apple Mac Pro 2019, so I decided to try…
I dropped the food Pusher one time on a tile floor and it cracked. I couldn't find a design so I made this in Fusion 360. I printed mine with 5 walls with a 0.6mm nozzle which was almost 100% solid. Printed without supports.
This is a remix of the electronics box lid designed by 'the freewheeler'. I love the Apple Mac Pro “Cheesegrater” lattice and thought the electronics box cover would be a perfect place for this. Printed this lid in PLA, Silk and PETG with…
Grater for garlic, ginger, turmeric or wasabi — coarse version also for other vegetables or hard cheese — easy to clean
Falls bei euch auch der Entgrater gern mal ins Material tief rein drückt, habe ich diesen Adapter entworfen. Die Fase wird ca. 0,5mm. Eure Klinge sollte 3,15mm im Durchmesser haben. Es Passt bei Noga Klingen und nicht namenhaften Amazon…
Who doesn't know it, you have exactly one deburrer with replacement blades, the blades are where they should be, but the deburrer itself is nowhere to be found. I recently discovered a nice pocket screwdriver while browsing here on…
VORON 2.4 Clicky Clack Door Stealth Skirts Da mir die Optik meiner Stealth Skirts für den VORON 2.4 sehr gut gefällt, habe ich nun eine speziell angepasste Version für Drucker mit dem Clicky Clack Door Mod erstellt. Damit die vorderen…
Original Parts: - Original Skirt by Vorondesign.com - Mid Fan by Eraser (reverse version) To print this parts with 3 colors, you have to change the filament at 2.2mm and 4.2mm height. Update 01.10.2023: - upload fixed…
This is a simple 3d printed replacement handle for a cheesegrater my mom loves. I can't live without her cooking, so this is my attempt to keep the italian dishes coming. Printed in PLA, although a dishwasher safe plastic may be better.…
It looks good, but it cant really hold any drips or spill. So if you like form over function here is the coaster for you! Created with OnShape:…
Though NCase offers an STL file for 3D printing a 140/120mm fan mount for the M2 case, it didn't completely fit in my M3 (colliding with my PSU). I designed this alternative that allows mounting a 120mm case fan using the same technique…
Dual 120mm front fan bracket for the Ncase M2 Grater featuring shifted fan holes for better airflow pathing around a side-mounted PSU. It should allow for more direct airflow to the CPU cooler for builds using the rear fan as exhaust.…
Durchmesser für Entgrater:19mm Taschenmaß für Ersatzklingen:65x12mm
Rack for storing up to 3 grating and slicing discs in a vertical position. These are made for the Vorwerk Thermomix accessory WunderSlicer by wundermix (V1 and V2). Ideally for storing them inside a drawer or kitchen cabinet / cupboard.…
A small box grater toy, two versions, one with handle to print in 2 parts, one without prints as one. Doesn't actually grate anything. I printed at 0.2mm. No supports required. Part of my ‘getting carried away with myself’ collection.
IKEA Skadis Holder / Halter for Ruko deburring tool / Entgrater
Printed from Prusament Ultramarine Blue Transparent PET-G. I use flame to remove filament strings.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I needed a reference for a garlic grater for clay work. As the model can also be used in printed form I publish it here.
This practical 3D-printed holder is designed to securely store a deburring tool along with up to 10 replacement blades. It fits perfectly onto the IKEA Skådis pegboard system, helping you keep your workspace tidy and your tools easily…
When you really like freshly grated cheese, but hate your crappy cheese grater.
Easy printing! no supports needed printed using standard 0.4mm nozzle (~6h)
Replacement for broken knob on a Moulinex hand cranked slicer. You can see a picture of this fabulous kitchen implement here
Ein einfacher Halter für das allseits beliebte Deburring/Entgrater-Werkzeug. Für die Aufhängung verwendet man am besten den hier: https://www.printables.com/de/model/323748-skadis-universal-hook
Dies ist eine Kappe für den SILVERLINE Handentgrater. In der Werkzeugkiste könnte man sich ansonsten an der Klinge verletzen. An die Linkshänder (wie ich): Leider ist das entgraten nur schön, wenn man den Handentgrater auch in die rechte…
NCase M2 Side IO Uses standard M2 IO bracket and components. Secured with 2 m3 screws to plate and friction fit under case. Requires feet with 20mm in height to clear and fit snugly.
With this model i want to participate in the COOLERMASER MASTERLIQUID ATMOS contest. My design features a airy design with lots of light paths for interesting light patterns. If you print my design upside down youre able to print with no…
Not everything needs to be disposed of as soon as it breaks. The metal part of my grater was still functional when the original handle broke off, but it was uncomfortable to use. I designed this replacement handle to attach to the top of…
Skadis Entgrater Halterung für Durchmesser bis 24mm
Headphone holder that integrates directly into the front panel of the NCASE M2 Grater
120mm fan bracket for front fan mount on NCase M2 Grater. Designed to fit a slim fan when mounted under a Corsair SFF PSU at the highest setting using all 3 screws, and fit securely when the front panel side bar (not sure what that thing…
customized display mount for the btt hdmi 5 inch
Printed with PETG 0.2 layer heights, 0.4 nozzle and 5% infill. No supports required. Modeled with blender (source included)
Halterung für den Entgrater Meistergriff am IKEA Skadis System. Es gib schon einige aber die halten den Entgrater alle senkrecht. Deshalb neigt sich bei dieser Halterung der Entgrater leicht nach vorne. So kann er besser entnommen und…
INTRO The stand NCase provide on their website was rubbish. So I made my own and this is it. The front stand can occupy two USB 3 ports, one USB-C port and larger power button. Please check you motherboard if you can add addtional USB…
You can support my works here: buymeacoffee.com This is a front dual 120mm fan bracket designed for the NCASE M3 Grater. The bracket allows two 120mm fans to be mounted behind the front grater panel for additional intake airflow. The fan…
Coupler for the Philco PHSM 9000 grater shaft. 11.5 mm is the inner diameter of the star-shaped hole where this coupler is inserted. There is some clearance for inserting the shaft, but please adjust it according to how accurately your 3D…
This is a convenient little bowl/base that attaches to the bottom of your cheese grater. I made it to fit the cheap one we have most likely from the big department store that begins with a W. Anyway, the bottom measures 81 mm x 105.5 mm…
Hola, este diseño actualmente esta en test por ende no puedo garantizar que funcione pero en teoría debería el gabinete tiene una capacidad de 3 ventiladores, 2 de 92x25 al frente y uno atrás de 80mm ,capacidad para una placa ITX con un…
Please see original for instructions on how to use. I print with 0.6 nozzle at 0.3 layer height. Grater (my) version is 47.92g filament, the original is 68.89g filament using generic PETG on P1S.
German: (english below) Diese 3D-gedruckte HSW-Halterung wurde zur Aufnahme eines Handentgraters mit einem Griffdurchmesser von 13 mm entwickelt. Zusätzlich verfügt sie über ein integriertes Aufbewahrungsfach für bis zu 10 Ersatzklingen.…
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
Easy to print. The clearance between the handle and the grater are 0.2mm, enough for assembling. You can use glue for a stronger fit. I use PLA for all prints. For the handle, I use the fuzzy-skin mode in OrcaSlicer
You can support my works here: buymeacoffee.com This is a custom offset SFX PSU mount for the NCASE M2 Grater. It was originally designed around my Cooler Master V850 SFX PSU. I have also included a separate version for Corsair SF1000 PSU…
Jak je vidět na obrázku, jeden z úchytů se ulomil (patrně zvýšeným pracovním zápalem paní kuchařky), čímž je celý díl na vyhození. Vyrobil jsem přibližnou repliku dílu. Skládá se, zejména kvůli tisku, ze dvou částí - podávacího nástavce a…
Wheels not included. The case for those who need that professional look.
Halterung für Noga Handentgrater, Noga Dreikantschaber Schaber, Noga Senker, Automatik Körner, Rico-Marker HM-Reissnadel Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
I've been obsessed with the cheese grater pattern and enjoyed the process of creating it using fusion 360. And it's fully parametric ! I'm happy to share the sources with you so you can tinker with it and use it in your projects. How to…
Simple stand for the grater discs for a Kenwood Food Processor Attachment (KAH65PL). This has extra space for the slicer disc, which takes up more space in this model of the attachment. I printed it on the Bambu Labs x1 Carbon in PETG at…
Various entries online confirm that the plunger for the kitchenaids grater attachment tends to break occasionally. The replacement is pretty expensive and it takes weeks to get them to send one, enspecially to europe. If only we had the…
We lost the food pusher for our rotary grater, so I made a new one. This is it, it works well. Update 20-01-2025: We recently found the original pusher - this one is closer to the blade than the original and so ends up with less “ungrated…
3D Model of Grater Ring Compatible with - IKEA UPPFYLD (Article Number 905.293.89) Hack for IKEA product to improve user experience Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed by…
IKEA Skadis Halter für Entgratet
Druck mit PETG oder PLA, 15% Infill, 0,2 mm Layer. 23.08.2025: Neue Version (durch zusätzlichen Haltering innen stabilere Befestigung)
Deburrer/Entgrater Case whit 2 slots for Blades
A design I made to support the Astral 5090 (or 5080) in the ncase m2 case. Small variations can still occur between cases and how it fits so check the fit yourself. This is for the normal (not inverted!) layout. Make sure to print it with…
3D printing is not food safe not matter what materials you use. Please coat your print in a food safe and washable material like silicone before using it.
Ein einfachjer Halter z.B. für Handentgrater von Gratec Typ EL1200
repair broken handle
This manual cheese grater had its glorious days on the 90's, made by Argentinian brand Moulinex . The mechanical metal parts were still completely functional, as well as the top plastic part containing them along with the handle. This top…
EN A replacement hinge part for the Migiris BETM-1. I have used this part's original dimensions, so it might be hard to fit in place. a bit of heat helped me to fit it in. I used PLA for my part but I would recommend a stronger material.…
It's handle for box grater that you can find in most polish houses and I don't know if there are popular outside of Poland. To install this handle you just unscrew old one and install new one with the same screw.
Introducing a state of the art cheese grater to power tool adapter that will make a GRATE tool in the kitchen! As seen in the following TikTok Video: https://www.tiktok.com/@bucio.boi/video/7471301266849778986?lang=en Required: Cheese…
Thread was changed for M22x2 for easier installation, so you need to print both files. Holder should be printed in PETG, nut can be printed either in PETG or PLA. Print settings I've used: Leayer height: 0.12mm Support: touching…
Es handelt sich um einen Stand für einen Rundentgrater mit Aufbewahrung für Ersatzklingen
We found this cheese grater in our local charity/thrift store and had to have it, however the handle was starting to show cracks and soon failed after a few uses. 3D printer to the rescue! Designed to simply slot on to the existing…
This custom 3D model adapts the iconic Mac Pro “cheese-grater” spherical ventilation pattern for use on the Cooler Master MasterFrame 600. Designed with optimized airflow channels and a visually striking geometric layout, the model…
You can support my works here: buymeacoffee.com These are custom 20 mm angled case feet for the NCASE M2 Grater. I designed them to increase bottom clearance for improved intake airflow, especially for builds using bottom-mounted GPU…
This is a print for an industrial cheese gratter we used at my job so I don't know what is the model of the machine or anything.
Description Old handle got destroyed in the dish disposal by a housemate. Saw one that looked similar but required a metal nut/bolt that I do not have. Wanted to make a version that is completely 3D-printed and also that 100% fits with my…
I recommend a high infill and a robust material that will hold up. Please note the picture is the old version. The stl is a newer more robust version.
passend für: https://www.amazon.de/gp/product/B00200DNNO/ref=oh\_aui\_detailpage\_o06\_s00?ie=UTF8&psc=1 Category: Other
I'm a pretty patient guy, but when tasks can go quicker, I'm absolutely not having it. So when it comes to grating a whole piece of parmesan for Cacio e pepe, I'm just doing it once by hand. Naturally as with all things: this calls for a…
I lost the lid to my OXO cheese grater and decided to design and print a replacement. The fit worked out perfectly.
Die Halterung kann aus jedem beliebigen Filament gedruckt werden und sollte große genug für die gängigsten Handentgrater und Senker sein. Ihr braucht nur eine DIN ISO 4762 M6x12 Schraube und einen Nutenstein um es an einem 3030 Alu-Profil…
Fruit grater for creating summer cocktail. Best with watermelon, cantaloupe, cucumber, papaya and melon. do not put in a dishwasher use food-grade pla
The plunger was lost in shipping so I made my own
This is an attachment I made for my West Bend Co Household Food Processor to allow me to use the grater disc. The square side attaches to the grater, and the cylindrical side goes down over the motor. Printed at 15% infill with PLA
The Monsieur Cuisine vegetable grater attachment has a common design issue: the blade insert is not properly constrained on the rotary axis . In some cases during use, the blade can move upward while spinning , eventually catching the…
parts needed 20x m3x16(or m3x12) hex bolts 4x m3x8 hex bolts 24x m3x5x4 heatset insert (optional) 1x ikea GRÖNÖ some felt or some rubbery material to put on the bottom (i used a old mousepad)(optional) some superglue printing guidelines:…
Lid for potato and vegetable graters popular in Eastern Europe. These graters are practically indestructible except for the lids, which wear out over time. Also can fit on other devices. no support is needed easy to print best practice to…
Mount for 92mm or 120mm fan at the front of the Ncase M2 grater case. Uses the attachments for the front IO of the standard front panel. Fit will depend on the components and layout you're using, but these were deigned to just clear a…
