Kitchen Cabinet Plinth Clip / Mutfak Tezgah Altı Baza Klipsi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kitchen cabinet plinth/baseboard replacement clip. Mutfak tezgah altı baza klipsi.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ENGLISH
Print Tips:
- Recommended material: TPU 95A or TPU 98A
- Flexible filament is recommended because the clip needs to bend slightly during installation
- PETG can also be used, but it may crack if the clip is forced too much
- PLA is not recommended because it is more brittle
- Layer height: 0.20 mm
- Infill: 40–70%
- Walls/perimeters: 4 or more
- Print slowly for TPU, around 20–35 mm/s
- Supports: Depends on print orientation
TÜRKÇE
Baskı Önerileri:
- Önerilen malzeme: TPU 95A veya TPU 98A
- Klips takılırken hafif esnemesi gerektiği için esnek filament önerilir
- PETG ile de basılabilir fakat fazla zorlanırsa kırılabilir
- PLA önerilmez çünkü daha kırılgan olabilir
- Katman yüksekliği: 0.20 mm
- Doluluk oranı: %40–70
- Duvar sayısı: 4 veya daha fazla
- TPU için yavaş baskı önerilir, yaklaşık 20–35 mm/s
- Destek: Baskı yönüne göre gerekebilir
