Dynamic profile end cap / pipe plug [ROUND]

USAGE

I've included some standard sizes, OUTERD(mm)-INNERD(mm) format. If you need custom sizes, follow the steps below.

You need to have freeCAD 1.1 or newer stable release installed. You can get freeCAD for free, from its official site.

After download, I suggest to use the Dark theme and the metric system! 

(On the example photos, I use the OpenDark theme from the OpenTheme addon. You can get it under Tools -> addonmanager)

Download the .fcstd file, and open it up in FreeCAD. You should see this on the left hand side under "Tree View":

Click on the parameters item, to bring up the Parameters Table. It will show up under the "Property View". 

Now you see all of the parameters. To change values, click on the value, and change it. Depending on your settings, FreeCAD may use dots for decimals, it shouldn't be a problem. To see the description of the variables, hover over the Label or the value:

After changing a value, the model will recompute usually in 3-15s. To export the changed modell, select the Cap body:

Then go to File -> Export:

Select the file path, and I recommend to export in .3mf (3D Manufacturing Format)

You're done, Open it up in your preferred slicer and print it :)!

PRINTING