Super Glue holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.73 net (excluding VAT)
For file: holder_0.2mm_20%_2p_PLA_2.36325m_MK3S_43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A holder for a super glue tube while in use.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 240
- Makes
- 8
- Views
- 945
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
While you are using a tube of Super Glue, you sometimes need to set the tube down (while the cap is still removed). I got tired of finding places to lean the tub (because laying it down, it will leak).
So I designed this little stand to hold the tube upright. I added a place to hold the cap.
As a bonus, I use the cap holder to store the stand when I put the tube back on my pegboard.
The pegboard holder was made with "PegStr", an OpenSCAD tool by "mgx".
https://www.thingiverse.com/thing:537516/files
How I Designed This
This was a quick, simple design in Fusion 360.