Jellyfish Wind Chime
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.63 – €3.22 net (excluding VAT)
For file: Jelly_beads_preview.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.93 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 2.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ocean-inspired customizable wind chime for garden, patio, or home decor.
- Rating
- 0 / 5
- Likes
- 133
- Downloads
- 186
- Makes
- 0
- Views
- 1,368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jellyfish Wind Chime
Ocean-inspired customizable wind chime for garden, patio, or home decor. A visually appealing and great-sounding wind chime that can be adjusted to your liking. Multiple variants of some parts are included to prevent repetition and create a more natural and visually interesting appearance.
The parts are scalable down to 50%. The photos of the printed model were actually taken at 50% scale. When using 75% scale or smaller, I recommend using the separate head bottom model: "Jelly_head_bot_thread_offset" so the threads have enough tolerance for easy assembly.
Features
Different model variants available
Multiple mounting solutions
Sounds great for a 3D-printed wind chime
Scalable down to 50%
Custom supports available
Design & Printing Details
Recommended Settings:
Layer height: 0.2 mm
Infill: 10–20%
Supports: Not necessary, some parts have custom supports
Print orientation: As provided in the files
Material: PETG recommended
Nozzle: 0.4 mm
Bed adhesion: Brim reccomended for some parts, see print files
To make sure the long thin parts print successfully, I designed custom supports that are easy to print and easy to remove. Use a flush cutter to remove the supports. I recommend printing the long thin parts, such as the jelly twists, one at a time to ensure optimal quality.
Assembly instructions
The head assembly consists of two separate parts that can be assembled almost seamlessly using threads. When adjusting the scale, please keep in mind that it is recommended to use the separate offset model to ensure enough thread tolerance.
There are multiple variations of some models. The head contains a total of 17 mounting holes, allowing you to arrange the parts however you like.
Update
I noticed some print files were quite large, so I optimized them to reduce their size and improve speed and usability without losing any detail.
Thank You / Enjoy Printing!
I’d love to hear your feedback, and if you have any questions, feel free to reach out.