Search results: chime

Chimera fidget

print nicely and fast but configure your perimeters to only have 2. 0.65mm at 100%

Liam F1 Wind Turbine | Fibonacci/Archimedes Golden Ratio

Wind Turbine inspired by the Liam F1, using fibonacci sequence for the blades. Leaves in a fibonacci pattern in plants maximise the area for photosynthesis and minimise the amount of blocking overlap. The same prinicpal can be applied to…

Chimera Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Hooting Owl Wind Chime

Updates 2026/06/16 : @RandSchlemiel created a Hooter Holder Hub for mounting the owls. 2026/06/02 I've created a remix for mounting the wind chime using an empty Prusament spool @ElFlecko created 30° a perch-mount for the hooting owl…

Archimedes' screw

The water screw, popularly known as the Archimedes' screw and also known as the screw pump, Archimedean screw, or Egyptian screw,[1] is a machine used for transferring water from a low-lying body of water into irrigation ditches. Water is…

Archimedes Wind Turbine Remix

Thanks to Lukass for the great wind turbine. The wind turbine turns very well. An (Brass) axle 4x190 mm, 4x ~ 80 mm and a screw M3x6 are required. Drill out the bearing blocks with 4.2 mm. Drill out the cross hole of the conical disk with…

Archimedes Wind Turbine

A symmetric wind turbine inspired by the Archimedes Wind Turbine Remix by Stuart800. I used three EZO 685 ZZ bearings (outside diameter: 11 mm, bore diameter: 5 mm, width: 5 mm; metal protection on both sides), and I used just a spot of…

Bamboo wind chimes

Bamboo wind chimes I have long wanted to model the shape of bamboo, because I like vases or flower pots with this pattern. This competition gave me the motivation to do it. For the first time, a pretty good result. I hope to create more…

Indiana Jones Dial of Destiny Archimedes Dial

In early spring of 2023, I built a small Indy / Jock Lindsey's Hangar Bar themed bar in our basement storage area /unfinished game room. As of mid-April 2023 I started to ask around on the internet looking for a Dial of Destiny /…

Wind Chime Spiral – Decorative Hanging Kinetic Sculpture

A lightweight spiral wind chime designed to gently rotate with the wind, creating a smooth and hypnotic motion. The shape expands into a 3D spiral when hung, giving a dynamic look even with minimal airflow. Perfect for balconies, gardens,…

Wind Chime

Print with PETG for outdoor use. Proint orientation with support

DEMON GIRLS BUST (CHIMERA)

Author: John Gosper (Kintall) https://www.thingiverse.com/thing:758165 Awesome Demon Girl Bust from Kintall. Prusa Research added bra, as original model can be considered NSFW 🙂

Turbine Windmill | Double Wind Chime with Bearings

Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…

Archimedes Wind Turbine

Ich bin zwar kein Fussballfan, aber wenn man schonmal die Vorlage hat... (Danke an Hofei für die Titelbilder) Update: 11.05.2024 Die Files für Konsole und Deckel hinten ausgetauscht, waren nicht 16mm. Sorry Update: 13.08.2024 Ein paar…

Archimedes Horizzontal Axis Windmill 01

I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions large…

Rotating Wind Chime – Tree of Life

🍃 Rotating Wind Chime – Tree of Life – 3D Printable Bring movement and calm to your outdoor space with this rotating decorative wind chime , designed specifically for 3D printing . Inspired by the Tree of Life , this kinetic ornament…

Archimedes

This is my next wind mill based on archimedes screw. Its work in progres soon i will try to apply generator and we will see. Printed by PETG 02 see video Category: Electronics

Chimera fidget

IT'S A SIMPLE 30MIN PRINT

Archimedes wind chime

The Archimedes screw lies horizontally in the holder. Depending on the printer volume, you can make them wider or narrower. The model is 200mm in diameter. It is better to place it on the side for printing, so you hardly need any support…

Skeletal Wind Chimes

Strike fear into your enemies from afar with these wind chimes. Printed both on MK4 in PLA and PETG with 15% gyroid infill, snug supports on build plate, and 3 perimeters. Tied all the pieces together with twine to complete the look.…

Archimedean Solids

The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces. All 13 can be listed in Mathematica with the expression…

Trammel of Archimedes (nothing grinder)

Mathematical toy mechanism: https://en.wikipedia.org/wiki/Trammel_of_Archimedes Fully articulated model drafted in Onshape: https://cad.onshape.com/documents/d659bd7bc2d1aa257044b19d/w/c36c7990b68ed0b7e594a5ae/e/fd8c4be747739989452cc2a9…

Unifi PoE Chime desk stand

A nice self designed desk stand for the Unifi PoE Chime.

Ornamental Skull Wind Chime

This wind chime features a detailed ornamental skull (remix from JEFF) and matching tubes, all designed for 3D printing. Key features: Integrated Design: The hanging string goes directly through the top of the skull for a clean, seamless…

Aardvark Crocodile Skull Chimes

Aardvark Crocodile Skull Chimes

Manual Archimedes Marble Machine from Gualala Gadget

This simple hand-operated gadget is great for younger kids (and older ones, too!). The Archimedes screw inspires this model. A central screw collects the balls in a chambered column and slowly lifts them to the very top of the maze, where…

BD1 "Chimera" - Open source FPV 2.2" drone

BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…

Kinetic Spiral Wind Chime

Overview This kinetic spiral combines rotational movement, pendulum motion and subtle contact-based sound interaction. The outer spiral rotates and reacts to the wind, while the freely suspended internal pendulum moves independently and…

Windmill LIAM F1 ( Archimedes Turbine)

The iconic Archimedes turbine, also known as the Liam F1 • Operates with Minimal Wind : Efficiently spins even with very little wind. • Stunning Visuals : Printing with multicolored filament creates a spectacular display. • Historical…

Chimera

A chimera perfect for your tabletop game! Print each piece with supports and a brim as flat as possible. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the…

Bamboo wind chimes

Bamboo wind chimes Bamboo wind chimes two rows, realistic bamboo shaped . Another model in the Wind chimes collection . Bamboo tubes in two rows. A little more patience when assembling, but the result will satisfy you. The hanging parts…

Archimedes and Mr Owl

Merlins Pet owl Archimedes from the Sword and the Stone. and Mr Owl from the Tootsie Roll Comercials. I gave it a tube that you can stick a tootsie roll into.. or he can be a Smoker… up to you.

GOKU GM10 Pro V3 GPS holder for iFlight Chimera 7 Pro V2

A GOKU GM10 Pro V3 GPS holder that fits the original parts of iFlight Chimera 7 Pro V2 backend. It is designed so that the GPS can be slid into the holder although it's a tight fit. Also has a lip on the top for extra protection. Print in…

Chime cover

AMF file attached has small "ears" to help with adhesion on the small sections. They may not be needed. I printed in PLA. Should be fine with any material.

Megumi Chimera Shadow Garden Manga Panel - Jujutsu Kaisen (JJK) - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Customizable Archimedes' Spiral

This is a customizable Archimedes' Spiral. http://www.wolframalpha.com/input/?i=Archimedes%E2%80%99+spiral Category: Math

Archimedes Wind Turbine with wall mount and sleeves instead of bearings

New mount that allows to mount a wind turbine on a vertical surface. You can use sleeves instead of bearings.

Iflight Chimera 7 Side Panels

Iflight Chimera 7 Side Panels

WIND CHIMES

Hang WIND CHIMES in your garden or near your resting place and listen to soothing tones. Imitation coconut print inside with supports, others without support. The attached needle will help to stretch the string faster.

Mini Archimedes Screw

Print in something durable, PLA or PETG. For more information about the Archimedes screw itself, visit this website. https://atomstalk.com/blogs/archimedes-screw/

3D hanging wind Spinner - Wind Chime

Wind chimes twister There are different sizes available. It is recommended to print with light supports on the base to improve print quality (attached there are 3mf files with support recommendations) Recommended to print:…

Flower Bell Wind Chime

Decorative model inspired by floral shapes and traditional Japanese wind chimes. The design features a lightweight flower-shaped body, decorative beads, and a hanging pendant that sways naturally with the wind. Additional materials…

Archimedes MK2 Windturbine

Thanks again to Lukass for the great Archimedes wind turbine. For my second remix, I used the original size of the Archimedes spiral and created a new frame with ball bearings and five different sets of tails. It turns even with barely…

Wind chime

I practiced shaper3d and this is what I came up with. It’s not perfekt but it works good. You need a threaded rod m8, 2 x 608 ball bearings and 3x lock nut m8.(I made a small mistake and still needed washers as spacers). Perhaps you need…

Do Nothing Grinder/Trammel of Archimedes Fidget

Turn the crank and the glides move back and forth in their channels, never colliding, but also doing nothing. This fidget is based on the Trammel of Archimedes , which is a mechanism that traces the shape of an ellipse (which can easily…

Aqara G4 Doorbell chime mount

The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…

GoPro Mount for iFlight Chimera 7

This is a remix of Armatures design (Thing: 4819929). They had already designed what seems to be a perfect replacement for the official iFlight gopro mount for the Chimera 7. The only issue I had is it didn't feature a countersunk hole…

Simple Wind Chime

Modern wind chime designed for easy 3D printing and simple assembly. The structure features a clean and balanced top piece, from which multiple tubes of varying lengths are suspended using strings that pass through lateral holes, ensuring…

iFlight Chimera 7 V2 side panels

Description in progress. I used to have a Chimera 7 frame, but I lost it some time ago when I was flying long-range. I bought a Chimera 7 Pro V2 and then realized that its panels are designed specifically for small iFlight7 FC boards and…

Doorbell Chime Cover

Needed to replace an old grungy and dated doorbell chime cover. Took measurements of old cover and came up with this. My chime has a little notch the lip in the back can slip into to keep it in place. Measurements are 136x206x53mm

DJI O4 cam/antenna mount iflight chimera 7 pro

I designed and created two components: a camera mount with a TPU soft mount and a GPS/antenna mount. The camera mount itself was printed in PETG, while the soft mount was printed in TPU with 100% infill. The original DJI cable was…

Zenergy Chime Doorbell

I had an old zenergy chime lying around the house, and thought to turn it into a doorbell. The assembly uses a TT Geared Motor, and a 5mm bent metal rod, connected with some metal wire, to oscillate the arm and hit the chime multiple…

GPS mount for Chimera 7 pro

Unfortunately, iFlight does not provide model files for the original GPS mount of the Chimera7 pro and so far I have not found any model files for it on the net. I wanted to print all the TPU parts of my copter in yellow, so I…

iFlight Chimera 7 Side Panels

I needed something to keep the snow from packing into the frame during snowy winter flights (mostly takeoffs and landings) in the Rockies. These panels are designed to cover the sides. They clip securely into the existing frame parts.…

Bent Wind Chime Sail

Idk this is a pretty old model but it kinda works

Seat belt chime no more

Tired of your seatbelt alarm going off because your work bag or other stuff is heavy enough to activate the sensor? Well I was, so I fixed it. This is designed for use in a 2013 Chevy Silverado, there are other designs for other vehicles…

Archimedes clock

Made this as a smoother variant of the fibonacci clock. Constructed with an archimedes spiral. The printed part is a bigger version with 320mm. For accessibility I changed the modell to 240mm overall. Printed in two colors but you might…

Archimedes Spiral extruder visualizer

Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…

Archimedes' Labyrinth - 3D Printable Puzzle | Brain Teaser for Adults and Kids | Ancient Geometry Logic Game

The Archimedes Puzzle 3D Model is a fascinating and detailed design that honors the mathematical prowess of the ancient Greek mathematician Archimedes. It will take you on an exciting 3D printing adventure. This gorgeous and challenging…

Useless Machine (Trammel of archimedes)

This was created using Fusion360 and it's rendering feature. On the top of the “Sliders” are holes to put M4 screws (with washers) into. They are there to hold down the “Handle”, so that ist doesn't fall of when in use. They have a…

Ripple / Bamboo Wind Chime (Print-in-Place)

This 3D printed wind chime features a modern, organic design inspired by fluid motion. Design Aesthetic : The assembly consists of six vertically suspended chimes, each featuring a unique sinusoidal ripple profile that creates a dynamic…

Door Bell Chime Cover

This is a custom door bell chime cover that I designed to match a geometric wall that I had added in my house. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: Hatchbox PLA

iFlight Chimera 7 pro v2 GoPro 9 10 11 mount

This GoPro mount fits the GoPro Hero 9, GoPro Hero 10, GoPro Hero 11. With an insert for TBS ND filter

Archimedean Spirals

Archimedean Spiral Fidget A collection of different nice print-in-place models. While the smaller ones fit in your pocket/hand the bigger and dangerous ones are more useful for educational/decorative usage. These models are good examples…

Jellyfish Wind Chime

Jellyfish Wind Chime Ocean-inspired customizable wind chime for garden, patio, or home decor. A visually appealing and great-sounding wind chime that can be adjusted to your liking. Multiple variants of some parts are included to prevent…

5- chime train whistle arrowhead

https://www.instagram.com/reel/Cj1LU76p1fR/?utm_source=ig_web_copy_link This arrowhead has 5 identical whistles, the plugs for each go in or out to change the inner volume of the whistle chamber. these can be tuned to play a variety of…

Skadis Mount for Aqara G4 Doorbell Chime Module

You can either print it in one piece (complete) or print front and back separately (front and back) - for less supports - and glue them together.

WIND CHIME « Feng Shui »

Update 02/06/2026 : Someone pointed out to me that the pendants might twist, meaning the textured part would no longer be on the outside. That’s absolutely right, so a solution was needed. - The pendants have been modified by adding a…

Archimedean Solids/Tube-Truncated Tetrahedron/Octahedron/Cube/Cuboctahedron/Icosahedron/Dodecahedron/Icosidodecahedron,Cuboctahedron,Rhombicuboctahedron,SnubCube,Icosidodecahedron,Rhombicosidodecahedron,SnubDodecahedron

Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron Truncated Cuboctahedron Truncated Icosahedron Truncated Dodecahedron Rhombicosidodecahedron Snub…

Stag and Doe Christmas Decorations - Archimedian Spiral

The Archimedian Spiral Infill adds a Christmassy touch to many decorations. Merry Christmas and Happy New Year to all! If you enjoy these models, you'll make my day if you buy me a cuppa tea.

Remix of Trammel of Archimedes

5/24/2018 I changed the files a little to make them more flexible in scaling to a 75% scale. I also added some extra M8 & M6 Nuts with 2 different tolerances in case my default .4mm tolerance is too tight for you. The full size version…

Wind Chime Replacement Clapper and Sail

The wooden clapper and sail on my wind chime set disintegrated in the outdoor weather a long time ago. I used Tinkercad to design some replacements and printed them in IC3D Brazz R-PETG. In the attached 3MF file I used 60% cubic for…

Chimera 7 Pro V2 Shoulder Pads

This is designed for the Chimera 7 Pro V2, however it “may” fit the Chimera 7 Pro or Chimera 7 (no guarantees). TPU not recommended since it is a snap fit, and harder plastics are better at deflecting the prop without breaking it anyways.…

Nutone Doorbell Chime Cover

This cover is designed to replace an aging brittle plastic Nutone doorbell chime cover, made circa 1999. I am unsure of the exact model number. There is a little bit of extra height added to fit the chime adapter for a Nest Doorbell.

Bullshit Grinder (Fully Printed!) AKA Trammel of Archimedes

iFlight Chimera7 Pro V2 Dragon Edition Guards and Bumpers

**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…

Stackable ano Whistling Wind Chime No supports

Whistling Wind Chine No supports needed in my test print. spins and whistles print multiple and stack for cool visual and audible effect. place on a 100mm screw with included spacer or a rod/dowel in the ground etc. not needed but can add…

Door Bell Chime Cover for Newhouse CHM1

Cover fits the specific CHM1 Newhouse chime (7.1" width). I created this to increase space for the Unifi Protect door bell accessory. It may fit other similar same brand models (Nu-tone, Zenith) where the chime is 7.1" total width. Please…

Spiral Wind Chimes

Same Idea as regular wind chimes, only in spiral conical shapes.

Halloween windchime/mobile

Simple decoration. parts can print fast. I printed 8 spiders for each string, and then you can choose which ones you would like for the bottom 8 parts. I used fishing line but I'm sure thread should work too. I added holes to the webbing…

Spiral Helix Chime (Print-in-Place)

Spiral Helix Chime (Print-in-Place) Helical Design : Features twisted stars for a dynamic, modern look. Print-in-Place : A single-unit assembly with integrated hangers and no post-processing. Wind Catcher : Includes a pentagonal sail to…

wind chimes

wind chimes, desgnied for ball bearing 12mmx4mm printed flat on bed, bend by heating the pla a bit and bending by hand, cooling with a wet sponge Windspiel für Kugellager 12mmx4mm, flach gedruckt, dann warm gemacht und von Hand die Flügel…

Archimedes Puzzle (Tangram-like)

Archimedes Puzzle (Tangram-like). Rome's counterpart to Rubik's Cube ;-) Challenge mode: Assemble all pieces to form a square Free play mode: Use pieces to creatively assemble any shape you like This ancient game was possibly invented by…

Wind Chime Hanger Outdoor Hook

Wall-mounted outdoor hanger/hook for wind chimes, windsock, or other lightweight items. Dimensions: 170 mm x 55 mm x 20 mm Print Details Print with PETG for outdoor use. Increase perimeters to 4 and infill to 25% for added strength. Layer…

All archimedean solids as step file

Here are all archimedean solids

Heart Shaped Spinning Wind Chime

Heart shaped spinning wind chime

iFlight Chimera7 Vifly Finder 2 Buzzer mount/holder

I like the Vifly Finder 2 Buzzer for being cheap, functional and reliable as far as I can tell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: SainSmart TPU emerald Notes:…

Archimedes' screw model, (Archimedes)

Can by printed with PLA. Both models need support. And you need to spin it fast to get some good results, because it is not waterproof. Now with V2 screw…

Wine Glass Wind Chime

Print List: 1x Base 1x Glass Secure Ring 1x Hanger Base 1x Hanger Hook or Hanger Ring - whichever preferred As for the ringers, you'll need 16 in total There are 3 options so far and i've provided the single files plus bulk prints laid…

5-Chime Train Whistle

This model attempts to replicate the sound of the classic 5-chime train whistle - the stereotypical sound of steam locomotives in the American consciousness. The sound could evoke the Old West or two lovers parting on a station platform.…

Archimedean polyhedra

These models are featured in figure 2.9 of Visualizing Mathematics with 3D Printing . Category: Math

Fantasy mobile/windchime

Simple decoration. parts can print fast. I printed 6 Butterfly for each string, and then you can choose which ones you would like for the bottom 6 parts. I used fishing line but I'm sure thread should work too. I added holes to the…

BMG-X2 Chimera Creality Ender 5 Extruder Mount

This is an all-inclusive extruder mount for the Bondtech BMG-X2 dual direct drive extruder on a Creality Ender 5. This fits the BMG-X2 model designed for the 18 mm c-c version of the E3D Chimera hotend (including the TH3D Tough clone),…

IFlight Chimera 7 Pro V2 Antenna support

I mounted a radiomaster DBR4 receiver on my Chimera 7 pro V2, so I had to place two more antenna on it. I decided to place them vertically on the back of the drone to avoid beeing on the same plane than the one mounted horizontally on the…

Valentine Wind Chime

Designed and built for the Printable's Valentine's Day competition - and for my lovely partner too of course! I designed this around 25mm EMT conduit tube purchased from Screwfix in the UK. Its very economical at around £13 for 3m! OD…

3 Chime Air Whistle

This is a three chime air whistle. You are going to have to use and air compressor to work it, a decent one. The thread on the bell and the bottom is 3/8-16 for all thread. The last is 7/16-18 for the air input. Thread the bell up and…

Wind Chime: Ornithopter of Leonardo da Vinci (The Flying Machine)

(Deutsche Beschreibung: siehe unten) I have tried to design a wind chime based on Leonardo da Vinci's flying machine, the Ornithoper . The wind chime should be as close as possible to the original sketch. I hope you like it! Printing…

Chimera7 Eco Drone FPV Legs

Print from TPU, zip tie on, enjoy soft landings.

Archimedes Screw - Motor Remix

Originally Uploaded by: https://www.printables.com/@Navakasi_57727 Please download his original file as well! Original Description: The water screw, popularly known as the Archimedes' screw and also known as the screw pump, Archimedean…

Nathan AirChime P5

This is a Nathan AirChime P5 commonly found on Locomotives across north america. This is a model i made for DTGs Train Simulator Classic but i set it up for 3d printing. Category: Toy & Game Accessories