AntHead TZ-V6 2.0 Hotend Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remixed AntHead TZ-V6 2.0 hotend mount for use with the stock TZ/Bambu Style V6 nozzles.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This is a remix of the original STL found in the GitHub repo for the AntHead. The original step file and description from the configurator seem to imply the use of a standard V6 nozzle and not a TZ or Bambu style V6 nozzle.
Unfortunately the stock TZ-V6 2.0 and similar style hotends, such as the one that was included with my Formbot Micron 180 kit, ship with a TZ or Bambu style V6 nozzle. The original hotend mount was too high up/recessed for the nozzle to actually clear the part cooling ducts. So the part cooling ducts would crash into the bed before the nozzle would ever get a chance to. So I extruded the bottom face of where the top of the hotend/heatsink interfaces with on the hotend mount.
I tried two different lengths and found that +2.75mm gave me the amount of clearance/offset that I wanted and will be the model I recommend. I can always adjust the extruded amount if a different value is found to be correct and will update the models and description.
Recommended - +2.75mm model
Optional - +2.5mm model