Universal Plant Propagation Lid - Different sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lid is a conus and can therefore be used for different container sizes There are different hole sizes as well.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 53
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This propagation lid is useable for a variety of container sizes, because of its conus. The Lid can be turned upside down (bigger diameter facing to the ground). This way you can also use it for very small containers.
There are two different versions of the Lid itself, one with little hooks and one without . The hooks are good e.g. String of hearts. This way they are more stabilized. The hooks need to be printed with support. you can just turn on the support "everywhere" (The conus itself normally does not need support).
I created different lids, with different hole sizes. These are named in the file name as "dX" [mm].
The lid is usable up to around 105 mm (diameter). The one marked as "BIG" is usable up to about 155 mm (diameter).
You can also increase the possible container size, by stretching the file in the slicer. Just remember that you will increase the holes for the plants as well. Therefore choose a variant, which will stretch into the desired size.
I also have a model, specific for bigger plants in a mason jar.
Happy propagation! :)