cr-10 belt tensioner improved idler remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
improved idler for cr-10 belt tensioner remix
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
improved idler for cr-10 belt tensioner remix of remix
meant to be used with m5 button head hex bolts and m5 lock nuts.
the rest of the pieces are with the original model
assembly instructions are pretty easy to follow by the pictures just take the hardware from the original cr-10 tensioner and the bolt and nuts from an axis wheel
Take the bolt from the axis wheel and push it through the hole in the bottom of the idler and put a nut on the other side
Take the black bolt from the original tensioner and put one of the white spacers on it thread it thru one hole and insert the bearings with the belt around them then pushed the bolt the rest of the way thru and add another spacer and nut on the end then insert into the rest of the assembly and put the end cap on then put another m5 nut into the knob and screw that onto the protruding m5 bolt
Your done!
Print settings:
Walls: 5
Infill: 50%
Material: pla+