1 / 3
PowerFist Clamp Repair
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I exploded my clamp the other day and after looking at how much new ones cost I decided to make this repair part.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This works well on the blue and black woodworking bar clamps sold at Princess Auto. Might also be similar products sold at Harbor Frieght.
12mm between the two 5mm bolt holes.
There is an end stopper on the bar by default and I decided to just remove it as I don't use it as a spreader 99% of the time. So this fix does not support swapping the clamp into the spreader mode.
Printed in PETG with 4 walls. I recommend PETG CF or GF for reinforcement.