1 / 6
OGP OQ Series Lamp House Blower Motor Fan Adapter — image 1
1 / 6

OGP OQ Series Lamp House Blower Motor Fan Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Blower Motor fan adapter for OGP OQ series optical comparator when replacing with new stock unit.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
26
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

Updated with pictures of blower motor model information. When I installed this I used longer screws, I left the metal bracket on, put RTV onto the bottom of the adapter, tightened down the screws, used the old blue silicone washers (split in half) on either side of the blower mount, and installed with all of the old stock hardware.

I went to install a blower motor fan on an optical comparator and the replacement unit did not come with a hose adapter that would properly fit.  I am unsure of the correct blower that this will fit at the moment, but I will add additional details when I get them.

I designed this to fit a little large so that some RTV could be placed around the adapter.  I have not tested this in the field yet, but I will make adjustments if necessary.  I modeled it off of the old welded adapter that is in the picture that has the box in it.

I would recommend using a hose clamp when installing this. 

Filament type: PCTG was used, but ASA is  recommended.
Infill: 50% Honeycomb
Layer Height: 0.2mm

Tags