Dual Simucube 2 Pro Power Supply Mount - Aluminium Profile Rigs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for two power supplies from the older version of the Simucube 2 Pro base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this mount to help clean up the cable spaghetti around my sim racing rig. The print shown was made on a Prusa Core ONE. This model fits aluminium profiles that are 40 mm wide.
This model is intended for older version of the Simucube 2 Pro bases that use two power supplies. I use it on a Sim-Lab P1X Pro rig, but it should fit any aluminium profile sim racing rig without issues. For reference, the spacing between the side mounting holes is 80 mm. Using only half of the mounting holes should still provide a solid fit. For mounting purposes use slide in nuts and m6 screws.
Print orientation:
Place the model on the build plate with the two large power supply openings facing down. This is the intended print orientation and should allow the model to print without supports on a Prusa Core ONE.
Printer settings
I recommend printing it in PETG with 4 walls, 15% infill of your choice (I used gyroid), and a 0.20 mm balanced profile.
I designed the model so that, when printed on the Prusa Core ONE, no supports are needed. However, if you prefer, you can support the inner surface of the power supply mounting area.
