Tarpaulin Anchor / Fixing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These fixings are designed to fit 12mm tarpaulin eyelets. Allowing you to anchor the sheet to a wooden frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Open Community License v1
This model is intended to help fix tarpaulins to wooden frames with countersunk screws. This application supported rainwater harvesting in an allotment garden.
I've found PETG to be reasonably stable in low-stress outdoor environments, such as this one in a garden.
This was printed with the large diameter on the print surface, no support or brim, with a couple of permiters and about 20% infil. I used a 0.6 nozzel with a generic grey PETG.
Screw squarely to avoid beaking the rim
but otherwise, this is stable for screwing and retaining the tarp.
