Rounded LED Strip Channel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was based off an idea created by someone else for LED lighting that I really liked but needed more adaptability.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I created this LED Strip channel as mentioned in the short blurb from another one someone had made, however I hand crafted this in FreeCAD myself and made all of the adjustments to ensure the pieces fit together properly (somewhat tight just as a heads up).
The rails can be printed normally like any other prints, in my case I did them all in Overture White PETG.
For the diffusers you will need to print that in vase mode most likely, I had issues when printing normally where one side would over-extrude on me making it incredibly if near impossible to fit into the rail.
As far as the parts list I used to make it all work in the end for me personally:
Input power cable, just cut off the female end as it was unneeded:
The AC to DC power supply that fits in the attached model for the box (though it may be overkill):
LED Strip (cut sections out to bring down to required size):
LED strip connectors:
Power and Data cable for running between sections:
LED Controller - ended up using a esp32 with one add-on for an external antenna to ensure connectivity because I ran into issues originally:
Xiao Esp32-C6: https://www.seeedstudio.com/Seeed-Studio-XIAO-ESP32C6-p-5884.html
External antenna: https://a.co/d/0fZfAjJg
Other supplies:
Aluminum strips 1/8" thick by 3/4" wide from the hardware store used as a heatsink
Command strips for mounting (these were used under the bars and to attach it to the cabinet)
If you have any suggestions or improvements feel free to let me know or make them yourself and upload a remix.