1 / 2
Garden stake connector for plastic coated steel stakes — image 1
1 / 2

Garden stake connector for plastic coated steel stakes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This connector allows 11 mm plastic coated steel stakes to be attached to each other at 90 degree angles.

Rating
0 / 5
Likes
89
Downloads
172
Makes
1
Views
918
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I made these to connect the plastic coated garden stakes that have bumps on them to hold tape or ties. The vertical part is split to allow it to slide over the stake and the horizontal part is open so the stake can be pushed into it and hold the split together tight on the vertical stakes. I printed them out of PLA+ with 35% TPMS-D infill but whatever your favorite outdoor filament will work fine probably. The holes are 11 mm so they could be scaled to fit your stakes based on that dimension.

Tags