Snapmaker U1 PTFE Holder One-part replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One-piece Snapmaker U1 PTFE holder with a compliant spring mechanism and cable-tie groove.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 26
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement version of the PTFE holder for the Snapmaker U1.
The original part was not shaped optimally for 3D printing, so I reverse-engineered it and redesigned it as a single-piece part instead of the original two-piece structure.
The original snap-fit hinge mechanism has been replaced with a compliant mechanism: an integrated spring and an S-shaped displacement limiter. This allows the part to function as one printed piece.
This version is slightly shorter than the original holder, and a cable-tie groove has been added to the top, making it easier to secure the PTFE tube.
I printed this part in nylon. If nylon is not available, I recommend using at least PETG. PLA is not recommended due to creep.
Close-up CAD image of the area where the compliant mechanism is applied.
This is the result of a nonlinear static analysis performed in Fusion.
Photo of the mechanism deformation after installation, with the toolhead moved fully to the front.