The Holy Mushroom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Behold the Holy Mushroom! This is the result of being bored on a conference call for work, and feeling creative!
- Rating
- 5 / 5
- Likes
- 127
- Downloads
- 565
- Makes
- 4
- Views
- 2,327
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
Behold the Holy Mushroom! This is the result of being stuck in a 3-hour webinar on a topic that has nothing to do with my job. I was feeling creative, and a bit artsy, so I started playing around with the form tool in Fusion 360. The result is a mushroom full of holes, much like my knowledge gained from this boring webinar.
If you print this, please share your results as I would love to see how it turned out. Bonus points for using a silk PLA in a rainbow gradient color! For best results print upside down with “Snug” supports as seen in the image from Prusa Slicer.
Remix Culture Approved! - To aid in remixes from the community I have added the design files in all of the relevant formats for you to download.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
Print Settings
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.
- 3-perimeters
- 4-top layers
- 4-bottom layers
- 20% infill
- Rectilinear Infill
- Monotonic Top and Bottom Pattern
Support Settings - Note: See image for proper printing orientation
- Overhang Threshold - 55 degrees
- Style - Snug
- Top Contact Z-Distance - 0.3mm
- Pattern Spacing - 4mm
- Top Interface Layers - 4
- Interface Pattern Spacing - 0.4mm
PLA Used: Polymaker PLA - https://amzn.to/3uF9Soo