1,177 models
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
Print approx. €13.09–€16.00 excl. taxPreliminary estimate for one variant
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Print approx. €9.97–€12.19 excl. taxPreliminary estimate for one variant
Mario Mushroom cookie cutter.
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
No support Design The set of two bigger mushrooms is inspired by a fungi species called chanterelle. These mushrooms are meant for the daily-used rings that need easy access, as they are just laying on top of the cap. The second type of…
Print approx. €7.85–€9.60 excl. taxPreliminary estimate for one variant
A ready-to-solve twisty puzzle box. Use this “Open top” version if you want to seal a prize inside the puzzle without solving it first. https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This decorative and functional light has been designed to be printed in one continuous spiral - fast, lightweight, material saving, functional and... beautiful? The model is prepared for an E14 220V lamp holder with a screw fix (+/- 3 cm…
Print approx. €5.34–€6.52 excl. taxPreliminary estimate for PETGSource material: PET
A ledge I designed for my treefrog terrarium. The frogs love them and spend a lot of time on them. I printed out a few at different sizes (resized in Prusaslicer) and printed them in a matt green and a silk dark gold PLA fillament. I…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
Behold the Holy Mushroom! This is the result of being stuck in a 3-hour webinar on a topic that has nothing to do with my job. I was feeling creative, and a bit artsy, so I started playing around with the form tool in Fusion 360. The…
Print approx. €6.75–€8.24 excl. taxPreliminary estimate for one variant
Update Hollow version of all 4 sizes posted and tested. Stl, bgcode and 3mf files updated. Hollowing saves nearly ⅓ filament at roughly the same print time. Below pictured test print failed due to user error. But even with the 90%…
Print approx. €10.80–€13.20 excl. taxPreliminary estimate for PETGSource material: PET
My kid wanted a mini mushroom pal. I had some MX Cherry switches and figured I could combine the two. I printed with Inland Marble PLA with mostly stock settings. I added a perimeter so I could make it hollow and amplify the noise of the…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
The file may be really small. Resize to your desired size. Print is quite scaleable I wouldn't recommend printing more than a .2 resolution Paint how you want! /!\ Be cautious of the leg stands when removing supports. They are a bit fragile
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - PLA Rusty Copper / Spectrum - PLA Peral Gold Nozzle: 0.4mm Layerheight: 0.15mm Brim: On Support: Build Plate Only (Necessary otherwise the head of the mushroom will be ugly) For Mini Settings Printer…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Easy to make cute Mushroom keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Add a touch of woodland charm to your furniture with these unique designed handles inspired by tree fungi! I have 6 different models, each varying in size, shape, and the number of fungus bodies for a natural, organic look. Designed to…
Print approx. €3.96–€4.85 excl. taxPreliminary estimate for one variant
Print the stem layer in white or glow in the dark and the top of the mushroom with a different color. Layer change at 5.40mm Please feel free to support me; https://linktr.ee/Rm3dprintdesigns
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
This are 25mm tall feet for the SSUPD Meshroom D. These are ~18mm taller than the original so your GPU can get more airflow for lower temperatures. Note: these do not fit the Meshroom S. Printed in PLA with a 0.6mm nozzle and 0.3mm layer…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Magnetic mushroom set to turn your Prusa Core One L printer into a tiny forest shrine. 🍄 It’s a modular collection of mushrooms, moss, log frame, and button design - that attach to the printer with magnets, so you can move them around and…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
My daughter really likes mushrooms. No, she doesn't eat them (I, on the other hand, love the taste); she just thinks mushrooms are cool. Or slay, I can't understand the youth slang. Anyway, I made her a jewelry organizer in shape of a…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
FR: Champignon en 2 partie, à coller 25mm de haut et 35mm de diamètre EN: Mushroom in 2 parts, to glue 25mm high and 35mm in diameter
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
This is a wrench to undo your Faema E61 group head mushroom and flow restrictor/ filter mesh cap. The size is 36 mm on one end and 22 mm on the other. I used it on my Rocket Appartamento (sizes should be the same for other brands but…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
Made this little mushroom croc accessory for the sake of the community
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Having grown some tasty gourmet blue oyster mushrooms before, I thought I'd try my hand at an articulated mushroom that can also be used as a key chain. It's made with 6 segments along with a hole at the top to put on a key chain. It's…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
The long awaited Darning Mushroom v2! (tDM2) The purpose of tDM2 is to fix two key issues with tDM1: Width of the stalk - v1 had enough space for just needles; sure, you could fit a rubber band or two in there but they don't come out very…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Easy to print towel holder for bathroom. I printed the rod and the handle separately even though the uploaded gcode places them together. A fusion 360 file of the model is provided for customization for your own washroom cabinets. Print…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
The Cookie Cutters come in cutter-stamp-pairs in 6 different versions. Print with the flat side down , no support needed. Cut out the cookie and then use the fitting stamp . I also added a Pin to glue on the back of the stamps. Feel free…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This is a Remix of Mushroom Ornaments by @cnelson who remixed this model . Thanks to both of them. I just fixed the ring that was causing the trouble.
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I change the sizes depending on the plant. The largest print is about 6 inches tall and 8 inch wide. Took 8 hours to print. Smaller sizes take about 4 hours. I Added water drain ring that ties all the drain tubes together in V3 (included)…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
Eine kleine Schere um Pilze zu ernten oder einfach nur um Zimmerpflanzen zurecht zu schneiden. Nicht für dicke Äste geeignet! Zum Zusammenbauen benötigst du Klebstoff, 1x Magnet 10mm x 2mm, 1x Schraube mit Innensechskant M3 x 10mm, 1x…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
Have you ever had an awesome pair of socks with a hole in them, wanted to fix them, watched multiple videos of how to darn a sock, see in the videos they have a darning mushroom, gone to the store to buy darning supplies to find they only…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
As we upgraded our Bird Buddy with a bird bath, we encountered one small issue. Even the smallest threaded soda/water bottles we could find were too tall to fit under the Bird Buddy roof! These same bottles blocked a good portion of the…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
Small mushroom shaped keyring to liberate european supermarket caddies. Doesn't need to stay in the slot, works as a key. Sometimes needs some wiggling. Modelled after 1€ coin. Works ok in PLA.
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Leicht zu drucken und sehr stabil durch optimalen Faserverlauf.
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
Made to the dimensions of the Tub Shroom, but will fit most silicon bathtub hair catchers. Keeps a mold-friendly object off surfaces and aids in the drying process. Made two versions: solid center mount and perforated (air-flow, yadda…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
pomollo di ricambio per console dj ed altro, il piccolo adatto ai perni di diamero 6mm e le dimensioni sono 18.05 x 18.05 x h25.02mm, il grande e adatto ai perni di diametro 6mm e le dimensioni sono 36.1 x 36.1 x h50.04mm
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
One in the series of old vessels. Rest of series will be uploaded soon. New series are coming. .gcode file is quite old for MK3 so propably it is best to slice it according toyour own prefarences. Enjoy fun with it :)
Print approx. €9.29–€11.35 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant
I recently published the model of a modular stackable bird feeder https://www.printables.com/model/1565776-stackable-bird-feeder-kit-mangeoire-modulaire-pour I admit it is lacking fun. Here is an alternate body shape. The parts specific…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
It's been redone
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
I wanted some fridge magnets of these shelf mushrooms. I remixed the original file with circles on the back to accept 10mm magnets.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
Each part was printed on a P1S 3d printer. All parts except the Lamp Kit Adapter were printed with 0% infill. The Lamp Kit Adapter was printed with 5% infill. The Mushroom Cap Bottom and Stem were printed with supports. You can use either…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
Uploaded15/06/2026 I uploaded a new head file that keeps the dots with the head together, so someone can try to print it in 2 colors. Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: Mushroom Lamp Components Kit…
An mushroom STL file. Easy print. please rotate the mushroom 180 degrees for minimal support
Support free mushroom skull jar with lid. The lid is not support free. Updated The Less Scratchy with the sharp interior point of concern that causes scratch tribute was removed. Also added an .STL file for convenience. I'll be happy to…
Ive remixed this to act as a piggybank. original design 3D Printy.
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
Power up your desk with this Mario-inspired Mushroom Clicker fidget toy! Designed for fans of classic games and satisfying clicks, this fun accessory brings a nostalgic touch to your day. Perfect for fidgeting, stress relief, or just…
This is a holder for Nintendo Switch game cartridges that is perfect for any Nintendo lover who enjoys punching bricks and curb-stomping turtles in their free time. This is one in a series of Mario-inspired items, so check out my profile…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D This is a cool DIY lamp project. The Magic Mushrooms, were intended to be…
Mushroom keychain of Mario world Attache porte-clés PLA Filament : Noulei Antique Gold -> PLA Noulei Antique Gold Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet ATLAS - The universal strong spool holder…
🍄 Mushroom Fantasy House – Whimsical Charm for Your Mini World! Bring a touch of enchantment to your 3D printing collection with this Mushroom Fantasy House ! Inspired by fairytales and forest folklore, this highly detailed model features…
Thanks for checking out my lamp. I designed this lamp and wrote an Instructable about the process here. If you want more info on the software/wiring/parts/designing check it out.
Mario Mushrooms [multi print] no ams needed!
These mushrooms can be printed with a single extruder or be configured to print with a dual extruder for a cleaner effect. I also included the Poison Mushrooms body which has the 'Evil Eyes" if you want to try and make as many Mushroom…
Print the stems and caps in whatever combination you want, they are interchangeable. I recommend clear translucent PETG. LED Strip is a Govee RGBIC 16.4 ft strip: https://www.amazon.com/dp/B0991Q94KP?ref=ppx_pop_dt_b_asin_title&t I folded…
I really liked Shotime369 's mushroom shelf I cleaned up the geometry and made a few sizes (S, M, L) and mirrored versions for all three. The large size should just fit on an Ender / MK3 bed. No supports needed (really). Enjoy.
I wanted to make a batch of Star & Mushroom cookies from Super Mario game, but I was unsatisfied with the cookie cutter designs that I found here on Thingiverse. So I designed my own. I made both a Large and a Small version (although I…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE MUSHROOM MARIO BROS KEYCHAIN This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain…
Assembly: Put some CA glue (super glue) in the holes and insert the pegs. I recommend gel super glue. 40, 60, and 80% scale use a single peg, so they're decorative only. Use “peg_short” for these. 100–200% scale use two pegs, and can…
This is an original design of a oyster mushroom character. Modeled in blender and printed with Prusa Mini. Printed with white PLA and wood filament as the base. You can choose to print it whole or print it in separate parts. All model…
Dual Mushroom Fairy House – Whimsical Woodland Charm for Your Prints Step into a storybook with this charming Dual Mushroom Fairy House – a perfect blend of fantasy and cozy forest vibes! Few supports are needed. I used organic-style…
FIRST PUBLISHED MODEL! Go easy, y'all. TinkerCAD'd these together to practice designing and because my oldest liked the box I printed for my youngest. Kids… what can you do? It was printed on both my Prusa Mini (Base and Dots) and my…
ntdecke den Kultpilz als praktischen 3D-Druck-Container! Du kennst ihn aus Super Mario – der ikonische Pilz, der dir Power-Ups verleiht! Aber dieser Pilz kann noch mehr: Er ist nicht nur eine stylische Deko, sondern auch ein cleverer…
Light up your room with a bang! This striking 3D printed mushroom cloud captures the iconic explosion shape, designed to sit perfectly over a standard LED tea light. Whether you're into science, statement décor, or just cool night lights,…
Der Kultpilz jetzt als Sparschein – dein 3D-Druck mit Mehrwert! 🍄💰 Du liebst Super Mario? Dann wirst du diesen Pilz lieben! Der ikonische Power-Up-Pilz hat ein praktisches Upgrade bekommen: Ab sofort kannst du ihn als stylischen…
This giant version of the Simple Twist Open Mushroom is optimized for a larger print. https://youtu.be/sBsHtqxGVIw Printing All parts print without supports. The bottom of the mushroom dots require decent bridging, but the model includes…
A little decorative mushroom shelf. Made with keyhole mounts in back that accommodate drywall screws.
This beautifully crafted mushroom-themed tray features intricate embossed mushrooms, creating a stunning natural design. Perfect for home decor, this tray adds an earthy, rustic touch to any space. Whether you use it to hold your favorite…
A friend of mine told me about this model and I offered to modify it so that the gills could be printed as part of the mushroom instead of being painted (or digitally textured) on as they were in the original. Beware of the file size,…
Mushroom Shelf magnet with 6x3mm magnet holes
These dual-color mushroom caps are design for dual colour printing with glow-in-the-dark filament. They are compatible with all of my previously posted modular mushroom sets! See here for video: https://youtu.be/9dKeSKuqm2Y See here for…
This is an original design of a morel mushroom character. Modeled in blender and printed with Prusa Mini. Hand painted white dots on the cap. You can check out my video for the whole collection! Printed in PLA. No support needed if body…
He's 3 inches tall but he ain't small! The magic flows like a mighty river through this one. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
Created from a Decorative Garden Mushroom using an Artec 3D Scanner. The model has been checked for holes and given a flat base for printing. This STL was pulled from their gallery of models located at…
Designer wall shelf in an organic style This modern decorative shelf with smooth, natural lines is a stylish accent for any apartment, home, studio, or office.
This is a modified foot for the Markellov Mushroom Lamp 2 . The upper Mushroom is based on the free lower poly version of the original Model. The higher poly version can be bought over the link in the original post and was used of the…
Model This is a remix of the Dual Colour Modular Mushroom Caps by DaveMakesStuff from Thingiverse . I added holes on the bottom of the mushroom stems and changed the threads as well, so the mushrooms can be glued together. Thank you Dave…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
"Japanese Erasers" are very popular with kids, as are keychains that hang in bunches on the outside of backpacks. I find both, though the erasers in particular, to be excellent 3D learning tools. When taken apart they're reduced to basic…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
I proudly present to you: The Medusozoa Mushroom The production name of this one was "Cephalopod-Jellyfish-Mushroom-Plant-Thingi". And while it is probably the better description, it was a bit too long. This one can grow almost…
Updated 17/03/2023 Someone said the thread is too tight, I reupload the loose version of the stem body as a replacement choice. ----------------------------------------------------------------------- A cute pocket-size version of the…
This model is a multi material version of the Mushroom from the Super Mario games. I made a normal and an "evil" version for the Poison Mushroom ;) Print instructions For these prints, I've tested the MMU2s unit with different nozzle…
Mushroom Cookie Cutter Set The cookie cutter is around 75mm Its a 2 piece item, one for cutting the cookie dough and one for modeling . Print with 100% infill If you have any idea/request let me know :D
Designed for 3d printing in multiple parts. 0.1~0.15mm clearance on mating parts, designed to be glued together.
These Squishy Mushrooms came to life while I was designing my Fidget Garden. After some brief research and consulting with my family, it was decided mushrooms were not a traditional garden vegetable so they were voted out of the planter…
This is a good planter for succulents and small plants and is very cute once painted. I will soon release an instructable including more details on creating this project. I recommend printing just the pot file with supports and the other…
A ready-to-solve twisty puzzle box. Use this “Sealed top” version if you want to be able to swap out the mushroom top and avoid glue. https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult…
Model created in Blender. The multi-color print on the thumbnail was made on a Prusa XL 5T. Doing a cut to flatten the bottom is recommended for printing.
Step into the magic of the forest with this charming Mushroom Stump Cottage ! Perfect for fairy gardens, tabletop adventures, or cozy shelf decor, this model captures the whimsy of woodland fantasy in every curve and detail. Some…
This is an original design of a morel mushroom character. Modeled in blender and printed with Prusa Mini. You can check out my video for the whole collection! Printed in PLA. No support needed if body printed upside down.
remixed from https://www.myminifactory.com/object/3d-print-mushroom-led-table-desk-lamp-22031 Buy me a coffee: https://ko-fi.com/jokereuc
Mushroom Leg Noozle 0.4mm Layer height - 0.2 Seam position - randomly Infil - 10% (Gyroid) Supports - 20° (organic) Printed upside down !!! + I use fuzzy skin only on the outside surface, except for the thread, which must remain smooth.…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon https://www.patreon.com/c/Adamnant - where you can ask me…
Used Poly.cam to scan a sculpture of a Fairy Sitting on Mushrooms. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Here is a ZERO waste, no support frag box. Print both parts and the lid simply clips on. NON FLOATING. Will sink. I custom designed this coral frag box to help attach mushrooms to small frags. I also housed a small mini maxi carpet in one…
This is Mushroomdicetower created for my dear friend who loves mushrooms above everything else. It can be used for any kind of game where you have to roll some dice. This is currently the first version with only one variant for the bottom…
![Mario Mushrooms [multi print] no ams needed!](https://media.printables.com/media/prints/69547e41-5f36-4173-a450-1d5a9c0288f9/images/12471363_02cebb75-4981-490f-a9b8-a66114d67c7b_7edf942c-9dd5-4dd9-8c05-14235391592c/2025-04-12_0898572d25f04.webp)
![Nuclear Mushroom Cloud [LED Tea Light Candle Lamp]](https://media.printables.com/media/prints/31e2a408-92ed-4a28-b631-50eb7b55efb5/images/11370644_a9f10dcc-a7c4-4900-85b0-fa63ab774bed_b6c9da68-4faa-41e2-bf43-23b9d5400c9a/l-1.png)
