1 / 6
Tacho Halterung Sigma BC 10.0 WR
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ersatzteil für die Befestigung am Lenker Replacement part for mounting on the handlebars
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Recommended print settings
PETG
Nozzle: 0.4
Layers: 0.1-0,15
Infill: between 20-25%
Perimeters: 3-4
Bottom/Top Layers: 5
SUPPORTS → YES Tree
Place the part on the print bed as shown in the pictures.
The four blocks that can be seen in the slicer image above the holes at the corners are "support blockers". This is because no supports are needed for the small holes.
The cross-sectional image shows that the cable ties can be pushed through.
Like the design?
Please leave a “like” …. ❤ …..
Feel free to follow me …. ✅ …..
I am glad about every make and a nice review!