1 / 4
Mammotion Luba 1 Wheel Spikes - Ramponi/Ruote Dentate per Luba 1 Mammotion — image 1
1 / 4

Mammotion Luba 1 Wheel Spikes - Ramponi/Ruote Dentate per Luba 1 Mammotion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement wheel spikes / toothed grips for Mammotion Luba 1 robotic lawnmower.

Rating
0 / 5
Likes
0
Makes
0
Views
172
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

[ENGLISH]

Wheel Spikes for Mammotion Luba 1 - Improved Traction for Slopes

Replacement wheel spikes designed specifically for the first version of the Luba robotic lawnmower (Luba 1). Perfect for improving traction on steep slopes, wet grass, and difficult terrain, preventing the robot from getting stuck.

TPU MATERIAL AND DESIGN ARE CONCEIVED TO FLEX, PREVENTING ANY SIGNIFICANT DAMAGE TO THE LAWN.

Technical Details & Features:

  • Dimensions: They feature a 6mm protrusion relative to the tread line and a thickness of 5mm.

  • Hardware Required: I highly recommend replacing the original fixing screws with M4x45 Stainless Steel (INOX) screws to prevent rust.

  • Charging Station Warning: Watch out for the charging dock contacts! With these spikes installed, the front end of the mower might tilt slightly forward. If the robot is not perfectly level, you may need to place a small spacer or shim under the front wheels to lift it, ensuring proper contact and successful charging.

Recommended Print Settings:

  • Material: TPU is strongly recommended. It provides excellent traction while being flexible enough not to damage or "plow" the turf during sharp maneuvers. (PETG/ASA can be used if you need extreme rigidity, but TPU is best for the lawn).

  • layer height: 0.16mm

  • Bottom/top thickness: 1mm

  • Infill: 25% (Gyroid recommended for extra strength).

  • Wall Loops / Perimeters: 4 or more to guarantee durability.

  • Supports: Not needed.

UPDATE 2026-07-18: Added ramps to prevent the mower from resting only on the spikes when returning to the charging station.

[ITALIANO]

Ramponi per Ruote Mammotion Luba 1 - Trazione Migliorata per Pendii

Ramponi / ruote dentate di ricambio disegnati espressamente per la prima versione del robot tagliaerba Mammotion (Luba 1). Perfetti per migliorare drasticamente la trazione su pendii ripidi, erba bagnata e terreni difficili, evitando che il robot si blocchi.

IL MATERIALE IN TPU E IL DESIGN SONO STATI PROGETTATI APPOSITAMENTE PER PIEGARSI, EVITANDO COSÌ DI ROVINARE IL MANTO ERBOSO.

Dettagli Tecnici e Note:

  • Dimensioni: Hanno una sporgenza di 6mm rispetto al filo del battistrada originale e uno spessore di 5mm.

  • Viteria: Consiglio caldamente di sostituire le viti di fissaggio originali con delle viti M4x45 in acciaio INOX per evitare problemi di ruggine all'esterno.

  • Attenzione alla Stazione di Ricarica: Fai attenzione ai contatti di ricarica! Con questi ramponi montati l'avantreno potrebbe pendere leggermente in avanti; se il robot non si trova in piano perfetto, potrebbe essere necessario posizionare qualcosa sotto l'avantreno per alzarlo e garantire così la corretta contattazione e ricarica della batteria.

Impostazioni di Stampa Consigliate:

  • Materiale: Si consiglia vivamente la realizzazione in TPU. Questo materiale offre un'ottima trazione ma, grazie alla sua elasticità, evita di "vangare" o rovinare il terreno durante le manovre e le curve strette.

  • layer altezza: 0.16mm

  • Bottom/top spessore: 1mm

  • Riempimento (Infill): 25% (Consigliato Giroide per la massima resistenza).

  • Perimetri (Wall Loops): 4 o più per garantire la solidità strutturale del rampone.

  • Supporti: Non necessari

UPDATE 20260718: aggiunte rampe per "evitare l'appoggio" sui soli ramponi andando in ricarica.

Tags