1 / 2
Air Blower storage for teardrop-slotted angle shelving
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for the Prusa Air Blower or puffer/duster to hang on the frame of teardrop/keyhole slotted angle shelving
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Since printing the Prusa air blower it's usually out on the bench so it was time to give it a permanent place to be that's still within reach.
My Core One lives on shelving with steel frame and plywood shelves. The teardrop shaped slots in the frame are spaced 36mm vertically, so I made a hook to hang the blower up there, along with other frequently used tools.
Orient the stl inverted so the ring is flat on the print bed (like the photo above) and no supports will be needed.