IKEA Pax wall bracket covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers fitting the Pax wall bracket, in multiple sizes to allow bigger screw heads
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 1
- Views
- 25
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Some of my Pax brackets needed larger than usual screws because the plugs found historical holes... So I built the original wall bracket, and then I made a modified version which is 5mm taller, covering even 10mm wide screw heads.
You can choose the print orientation but it needs supports either way due to the shape, so I suggest putting the supports on the covered back side, keeping the outside face nicer. Otherwise you can use default settings like: 0.2mm layer height, no brim. Infill doesn't matter, this will be built using just walls.