IKEA Pax wall bracket covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers fitting the Pax wall bracket, in multiple sizes to allow bigger screw heads
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 25
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Some of my Pax brackets needed larger than usual screws because the plugs found historical holes... So I built the original wall bracket, and then I made a modified version which is 5mm taller, covering even 10mm wide screw heads.
You can choose the print orientation but it needs supports either way due to the shape, so I suggest putting the supports on the covered back side, keeping the outside face nicer. Otherwise you can use default settings like: 0.2mm layer height, no brim. Infill doesn't matter, this will be built using just walls.