Brackets for Steel T-Post
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to utilize a steel T-post as a structural beam for shelving
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Open Community License v1
I had to come up with something for hanging a shelf from the ceiling...
This bracket is designed to utilize a standard steel T-post as a structural beam, hanging from 3/8-16 steel threaded rod running through a hole drilled through the shelf material. The end brackets have a slot for a 3/8-16 flanged nut that can be inserted from the side. Mid brackets are optional; I found that one was enough to reduce flex for a 7-foot steel T-bar.
Printed in PLA with 30% adaptive cubic infill, no supports needed for the end bracket if printed with the side that accepts the flanged nut facing down (mid bracket can be printed from either side).