1 / 3
Brackets for Steel T-Post — zdjęcie 1
1 / 3

Brackets for Steel T-Post

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to utilize a steel T-post as a structural beam for shelving

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Open Community License v1

I had to come up with something for hanging a shelf from the ceiling...

This bracket is designed to utilize a standard steel T-post as a structural beam, hanging from 3/8-16 steel threaded rod running through a hole drilled through the shelf material.  The end brackets have a slot for a 3/8-16 flanged nut that can be inserted from the side.  Mid brackets are optional; I found that one was enough to reduce flex for a 7-foot steel T-bar.

Printed in PLA with 30% adaptive cubic infill, no supports needed for the end bracket if printed with the side that accepts the flanged nut facing down (mid bracket can be printed from either side).

Tagi