EEW Fold Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement parts for many of the EEW Fold eSpinner plastic parts
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 284
- Makes
- 2
- Views
- 2,141
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
These are many of the plastic parts for the EEW Fold. The EEW Fold is made from injection molded parts so these will be different if 3D printed, but these parts have all been tested and should work. You can use these to make more bobbins, as replacement parts, or printing them in interesting colors to customize your eSpinner.
If you need more bearings for bobbins they use the R6-2RS bearing. More information about those and other parts for my products on this page: https://www.dreamingrobots.com/replacement-parts/
You can learn more about the EEW Fold electric spinning wheel at: https://www.dreamingrobots.com/
The magnets used for several of these files are 11x11x3mm square magnets. If you can get magnets that size you should be all set (even if they don't have a screw hole you could glue them to your 3D printed plastic part). If not you can unscrew the ones from the part you are replacing. However some of the parts have threaded inserts in my injection molded parts. You can get M2.5 threaded inserts that can be added to 3D printed parts, but I haven't tested any of those yet.
I added -NoInsert for the applicable files. With these you can use a self threading flat M3 or #4 screw to hold the magnets in place without using the threaded inserts mentioned above.
The ceramic ring sliding hook requires a #20 ceramic ring (ID 14.75mm, OD 18.7mm). https://www.amazon.com/dp/B0DMV5RWT7
Enjoy!