Ender 3 Pro Wire Trough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drop in insert for the frame cutout to the control board underneath the Creality Ender 3 Pro. May fit other units.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 87
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Changing wiring on a Creality Ender 3 Pro and similar 3d printers results in removal of a fabric tape, typically, from the bundle of wiring to access the wires. Replacing the fabric tape or reusing it is a possibility, but I don't want to rewrap a bundle of wires every time I modify my printer wiring. So, I created this thin plastic insert to drop into the slot to protect the wires from touching any sharp metal edges. A slide in place cover is provided to keep the wires where they belong if so desired. Now, anytime I need to replace a fan or do anything wiring related, I slip off the cover, change the wires, slip the cover back on and that's it.
This may fit other Creality Ender series printers such as the V2 and the original Ender 3; however, I've only tested it on my Ender 3 Pro where it has been in use for several years.
Printed at 0.2mm layer height at 10% infill. Supports will be needed for the tabs.