Stacking Lee Die Set Case Trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is an expandable way to store your Lee Reloading Die Kits. Stack them up. Add a tray at the top for extras.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — NoDerivatives
Here is an expandable way to store your Lee Reloading Die Kits. Stack them up as high as you like, make a stack for pistol dies, and another for rifle dies. Add a catch tray at the top for extras.
The trays can hold full-size die cases, a double and a single together, or three singles.
Printed with PETG and 20% infill, I used a raft (especially for the pins). If you use the raft on the trays, try to pull it off as soon as the print finishes for easier removal. I left one of mine sitting and just heated my bed back up for a while to help with removal.
You may need to adjust the size of the pins to accommodate your specific tolerances. The pins included are 5.5 mm in diameter and 18mm long. There are four pins per print file.