1 / 3
Nespresso Coffee Capsule Cleaner – For Aluminum & Plastic Capsules — image 1
1 / 3

Nespresso Coffee Capsule Cleaner – For Aluminum & Plastic Capsules

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A practical 3D printable tool to quickly empty used coffee capsules before disposal or recycling.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
70
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Used coffee capsules often retain wet coffee grounds, making disposal messy and less convenient.

This 3D printable tool is designed to quickly remove the spent coffee from both aluminum and compatible plastic coffee capsules, helping you prepare them for disposal or recycling according to your local regulations.

Its compact design makes it a practical accessory to keep next to your coffee machine, allowing you to clean capsules in just a few seconds.

Features

  • Compatible with aluminum and compatible plastic coffee capsules.

  • Quick removal of used coffee grounds.

  • Compact and easy to store.

  • No supports required.

  • Fast and easy print.

  • Low filament consumption.

  • Ideal for everyday use.

Printing Settings

  • Material: PLA or PETG

  • Layer height: 0.20 mm

  • Infill: 20–30%

  • Supports: No

  • Brim: Optional

How to Use

  1. Insert and rotate the tool into used capsule to release the coffee grounds.

  2. Empty the capsule completely.

  3. If required, rinse the capsule before disposing of or recycling it according to your local waste management rules.

Compatibility

Designed for Original Nespresso®-style capsules made of aluminum and compatible plastic capsules with the same external dimensions.

Compatibility may vary slightly depending on the manufacturer. If necessary, a small scaling adjustment can improve the fit.

Design Notes

Finding the right shape wasn't as simple as it looks. I went through many design iterations and test prints to achieve a geometry that works reliably while keeping the tool easy to print and comfortable to use.

Before Using the Tool

Important: This tool is designed to remove the coffee grounds after the capsule has been opened.

Before use, carefully open the top of the capsule by hand using the tip of a knife or another suitable pointed tool.

Environmental Note

Separating the coffee grounds from the capsule can make disposal cleaner and may simplify recycling where local regulations require empty capsules. Always follow your municipality's waste collection guidelines.

Tags