Olight Baton 4 bike mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bike mount for Baton 4 torch light
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just print as in the model file with supports on the top part (see pic) and then insert the holder and secure it with lock.
Secure to bike rail with screws and adjust the angle.
You will additionally need:
- 2x M4 x25mm countersunk screws
- 2x M4 nuts
- PVC piping glue (or something for the material you print it with (PETG, ASA, ABS, - NOT PLA)
USE GLUE to make sure it will not fall apart (glue together holder+top+lock).
I use PVC piping glue for PETG which can be bought in any decent hardware store (or online) and works great).
My print settings:
- printer: Prusa MK4S
- layer height: 0.3mm
- infill: 15%
- sheet: Powder coated PEI
- nozzle diameter: 0.4mm
- print orientation: as on the model files
- material: Rapid PETG from Elegoo
- supports: only for the top, as on the picture
- perimeters: 4
- solid layers (top/bottom): 5/4
Feel free to support me on Ko-Fi https://ko-fi.com/jurajmriso
I can also sell the source files if you want to save some time designing variations.
Contact me here or via contact form on https://juraj.mriso.com