Icarus Probe V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightweight (28g) open-source leveling system for leveling (not finished and just proof of concept).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Icarus v1. This is a lighweight (28g) leveling mechanism utilizing a d2f microswitch to probe the entire toolhead. There are 4 versions, 1.0, 1.05, 1.1 and 1.2mm. These are the tolerences of the main sliding part. If the flanges on your bearings are slighty smaller than 1mm, you are able to choose the smaller 1mm version. The sliding utilizes 4 F623 bearings to ensure squaring and smoothness. It is designed to fit on the standart mgn9H rail block. The instructions are the photo's above until I make a dedicated one. To test which version will fit best, print the test model and see if the flange of the bearings fit. I am yet to make firmware for this, but people can already test it under own risk, this is just a proof of concept.
Specifically designed for Xol and Stealthburner toolhead.
BOM:
8 m3x10 or 4 m3x10 + 4 m3x8
8 m3 heated inserts (m3x4x5)
4 F623 bearings
1 d2f microswitch
2 m2x10 self threading screw for microswitch mounting
Print instructions:
Print parts in the original oriëntation.
Support ON.
For the belt clamp the best quality possible (if you have a smaller nozzle or stronger filament use that).
Enjoy and let issues/tips/tops know :)