Janoleafs LED Light Panels-Xenoberries

The latest design iteration of my Janoleaf series: My custom DIY LED diffuser wall panels/3D wall Decor! This design is the first in the series where it pivots away from linear geometry and instead, I created an organic sci-fi inspired shape. A cluster of futuristic/organic proportions! In my cluster, I use 3 of the diffusers as static decor and have 2 of them wired up with LED rings and WLED controller to create a inhuman glowing effect!

https://www.youtube.com/shorts/vDeP2XGgMy4

MATERIAL SUGGESTIONS: Recommended to print in a translucent material for maximum LED diffusivity or use fun neon/UV reactive colors with black/blue lights for a really trippy experience! Filament I used linked here: https://shop.polymaker.com/products/panchroma-gradient-neon?srsltid=AfmBOorCsiUVWbP97oHFhet-VpEF1154NllwAd_eD4DCeEutf95KZtMC&variant=45185936785465

NOTE: If using this filament, use black/blue light LEDs for best inner glow result

PRINT SETTINGS: 100% Infill, 0.2mm layer height, organic supports recommended for underneath the shell and for the wire cutout areas.. See 3mf file for organic support placement. None are needed on outside surface.

LED'S/CONTROLLER SUGGESTIONS: The LED rings and WLED controller i used are linked here but feel free to use whatever LED's you have, granted your power supply is sufficient. I used WLED to control the addressable LED's to control the colors and effects. 

https://www.amazon.com/dp/B0BYDHDBQP?ref_=cm_sw_r_cp_ud_dp_ABX9BWGV3FBK71CA3Q6H

https://magwled.com/

For wall mounting, I recommend small command strips or wall safe 2-sided tape. Use 2 sided tape or electical tape for mounting the LED ring onto the top surface of the inward tabs. See pic for installation reference.

Hope you enjoy the design and if you have any questions, please let me know!

To see other Janoleaf DIY panel designs from my collection, start here: