1 / 8
Creality Falcon 2 Centered Alignment & Mounting Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed part to add through holes to be able to mount & keep in place the creality falcon while also aligning the bed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Designed for creality 500x500 honeycomb with rubber corners.
This version centers the honeycomb within the mechanical axes, it has four unique feet for the Right Front, Left Front, Right Rear, Left Rear.
500x500mm is larger than the Falcon can cut and your machine will hit limit switches before it gets to the edge of the honeycomb with these alignment feet.
Will work with other 500x500mm honeycomb plates but you may have a little bit of wiggle room