Adventure Force Axis Switch Pro Muzzle with lower picatinny rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adventure Force Axis Switch Pro Muzzle with lower picatinny rail
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 11
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
This is a slip-on muzzle for the Adventure Force Axis Switch Pro blaster that includes some lower picatinny for a foregrip. To really make it work, you should shorten the magazine switcher. I have a model out there for that as well that requires no permanent changes. You could also just remove the outer handle from the switcher. The 3mf should include 2 versions. I highly recommend the V2 as the V1 has had issues with the rail screws disconnecting.
https://www.printables.com/model/1700909-adventure-force-axis-switch-pro-magazine-switcher
https://makerworld.com/en/models/2716225-adventure-force-axis-switch-pro-magazine-switcher
Materials:
2x M3x8mm Machine Screws
3x M3x10mm Machine Screws
3x M3 Nuts
Printing Instructions:
You will need supports for the muzzle - but you can turn them off for the picatinny rail. I recommend PETG with 5 walls and 20% gyroid infill, but PLA should be fine.
Installation Instructions:
1. Put the 3 M3 nuts into the grooves inside the barrel. One is at the end of the tunnel.
2. Use the 3 M3x10mm screws to attach the rail to the blaster. The holes will only line up one way. Be sure to engage each of the 3 nuts.
3. Remove the two screws holding the muzzle on the blaster.
4. Slide the new muzzle over the existing orange cage muzzle.
5. Use the 2 M3x8mm screws to attach the new muzzle to the blaster.
Versions:
2026-06-30Initial creation
2026-07-15Tightened screw holes on muzzle side, added 3 nuts to help hold rail, extended rail screws from 8mm to 10mm