Drop Ceiling Hooks For Par Lights And Power + DMX Cables
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Both files attach to drop ceilings with 25mm thick beams, and make putting up par lights and routing cables easier.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
These allow a user to hook most par lights onto the supports of a drop ceiling, as well as to neatly route power and standard DMX cables simultaneously. They hook on with a bit of force, and can be taken off by bending one side of the clip away from the beam with your thumb, and then simply unhooking the other end.
They both print in one piece without any supports, and take very little time to print.
These were thrown together in Fusion to hang some lights for a D&D setup, but there are probably many other less niche use cases. Printed in Sunlu PLA+ 2.0 on a P1S with OrcaSlicer's 0.20mm Strength preset, and they work great. PETG is probably also a great option.
Hope this helps somebody!