1 / 3
Swivel Air Vent with 45° Bow (AC Exhaust and Intake) — image 1
1 / 3

Swivel Air Vent with 45° Bow (AC Exhaust and Intake)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

360° freely rotatable 45° Air Duct - point your Intake/Exhaust wherever you want. 160mm ID.

Rating
0 / 5
Likes
3
Downloads
24
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

As usual, every practical design starts as a problem.
Mine was my Monoblock AC having a crappy window-mount solution and only an exhaust hose. You all know the problems coming with such a design...

So i converted the AC to a 2 hose design (Intake and Exhaust), cut a wooden board to fit in the window and mounted hose adapters to it on the inside. Since i didn't want exhaust and intake airflows to mix, i needed a directional solution that's also rainproof.

This is my universal solution.

I mounted two of these on the board, pointing downward-ish and away from each other.  As long as you turn it in the lower arc, it will be more or less shielded.

There is a small drain incorporated in the flange in case water gets inside, it should be mounted downwards to work properly.

The ID (Inner Diameter) is 160mm so you don't have to worry about obstructions and super precision when mounting. I use 150mm hoses on the other board side. 

How-to for those who are unsure:

No supports needed when positioned correctly (Flange outside down, bow with flange ring opening down).
I only used 1 wall and 5% gyroid infill on the bow, since there is no mechanical stress.
The flange I printed with 2 walls and 10% infill.

Use material fitting your use case (UV-Resistance, thermal requirements etc). I used ASA.

Put the bow through the flange, then mount the flange (4.5mm sinkholes in the design) to a flat surface. This holds the bow in place. There is enough play so you can turn and direct it as needed, in my tests it held in place by itself while staying turnable.

Have fun =)

Tags