1 / 1
Bestway Lay-Z-Spa Inlet Chlorine Dispenser / Einlass Chlor-Düse — image 1

Bestway Lay-Z-Spa Inlet Chlorine Dispenser / Einlass Chlor-Düse

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bestway Lay-Z-Spa upgrade: Chlorine dispenser integrated into the water inlet for optimal distribution. Print in ASA!

Rating
0 / 5
Likes
7
Downloads
31
Makes
0
Views
272
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a functional replacement and upgrade part for Bestway Lay-Z-Spa whirlpools. It screws directly onto the water inlet inside the tub.

Universal Tablet Compatibility: The internal geometry is designed to fit both standard small 20g chlorine tablets and large 200g long-term tablets or broken pieces. Standard chemical dispensers often float around and get in the way, or the original chemical connect piece breaks. This integrated inlet nozzle allows you to place your tablets directly into the stream of the water inlet, ensuring optimal and rapid distribution of pool chemicals throughout the spa.

  • Perfect Fit: Designed to match the original Bestway thread.

  • Hydrodynamic Design: Optimized slots for continuous water flow without putting too much backpressure on the pump.

  • Easy Maintenance: Simply unscrew the cap to refill.

CRITICAL MATERIAL NOTE: Do NOT use PLA or PETG for this project. Chlorine, pool chemicals, and constant UV radiation plus warm water will degrade PLA rapidly. PETG will survive longer but might get brittle or warp under high summer temperatures and chemical stress. Recommended Materials: ASA or ABS. ASA is highly UV-resistant and chemically stable against pool water.

PRINT SETTINGS:

  • Material: ASA (preferred) or ABS

  • Layer Height: 0.20 mm (crucial for clean threads)

  • Perimeters / Wall Loops: 3 or 4 (essential for water tightness and thread strength)

  • Infill: 20% to 30% (Gyroid for stability)

  • Top and Bottom Layers: 4 or 5

  • Supports: Depending on your slicer orientation. It is recommended to print the main body with the thread facing down on the build plate. Minimal supports might be needed for the internal overhangs depending on your bridging performance.

Dies ist ein funktionales Ersatz- und Upgrade-Teil für Bestway Lay-Z-Spa Whirlpools. Die Düse wird direkt auf den Wassereinlass im Inneren des Pools geschraubt.

Flexibel für alle Tablettengrößen: Das Gehäuse wurde so dimensioniert, dass sowohl die gängigen kleinen 20g Chlortabletten als auch die großen 200g Langzeittabletten oder entsprechende Teilstücke perfekt hineinpassen und optimal umspült werden. Normale Dosierschwimmer treiben oft störend an der Oberfläche oder die originalen ChemConnect-Aufsätze gehen verloren oder kaputt. Diese modifizierte Einlassdüse ermöglicht es, die Chlortabletten direkt im Filterstrom zu platzieren, was für eine schnelle und gleichmäßige Verteilung der Poolchemie sorgt.

  • Perfekte Passform: Exakt abgestimmt auf das Bestway-Anschlussgewinde.

  • Hydrodynamisch: Optimierte Strömungsschlitze sorgen für guten Durchfluss, ohne die Pumpe unnötig zu belasten.

  • Einfaches Befüllen: Kappe lässt sich zum Nachfüllen der Tabletten leicht abschrauben.

WICHTIGER MATERIAL-HINWEIS: Bitte drucke dieses Teil auf keinen Fall aus PLA oder PETG! Chlor, Poolchemikalien, warmes Whirlpoolwasser und UV-Strahlung lassen PLA innerhalb weniger Tage zerbröseln. PETG wird unter chemischem Einfluss schnell spröde. Empfohlenes Material: ASA oder hochwertiges ABS. ASA ist extrem UV-beständig und chemisch resistent gegen Poolwasser.

DRUCKEINSTELLUNGEN:

  • Material: ASA (bevorzugt) oder ABS

  • Schichthöhe: 0.20 mm (wichtig für saubere Gewinde)

  • Wandlinien: 3 oder 4 (wichtig für Wasserdichtigkeit und Gewindefestigkeit)

  • Infill: 20% bis 30% (Gyroid für Stabilität)

  • Obere und untere Schichten: 4 oder 5

  • Support: Je nach Ausrichtung im Slicer. Es wird empfohlen, das Gehäuse mit dem Gewinde nach unten auf das Druckbett zu stellen. Aufgrund von Überhängen ist eventuell ein minimaler Support im Inneren nötig.

Tags