532 models
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…
I really liked the latest changes to the Prusa i3 MK3 Extruder. However, I don't really like pulling the part cooling air from the heated bed. 1. Maybe a little warmer ?. Cooling off the bed faster? The 45° fan configuration makes that…
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
This is a 5015 fan inlet for EVA 3 where the fan is oriented parallel to the backplate. Use this part if you have not enough space in the back of your printer for the new fan orientation of EVA 3. Print one of the three arms to attach the…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Boondocking with a RV and filling the water tank with water bottle was a challange. I found this RV water cap thingiverse.com/thing:2438303 that led me to create a water funnel printables.com/model/334105-rv-water-spout. It worked great…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
This is a 5.5-inch diameter irrigation ring designed to be used with 0.25-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
A lot stronger than you might think. Print long way down. I did have to hammer the pieces slightly and that's by design. You could use screws to secure the pieces a bit more but just by friction alone it should be fine. Sturdy pieces that…
Based on the Idea of user kmccon ´s 45° air inlet https://www.prusaprinters.org/de/prints/9881-prusa-mk3-air-inlet-45deg i decided to change an optimize the shape and ad a little upward scoop at the inlet lip. I also reduced the thickness…
this is a simple flexible port you can add to your projects - print the port in TPU and the handle in PLA/PETG No supports required just print and screw together after using the hole template to cut out an opening. Your power cables…
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
UPDATE Added new .stl File. Based on my 45° air inlet i changed the geometry: The air intake is now extended and shows about 45° upwards. With this design (many thanks to user chewey for the idea! ) there should be less hot air form the…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
The enclosure for Sonoff NSPanel Pro with IEC C8 AC socket for convenience remove the mainline or for optional inline AC switch. The enclosure is designed with minimum overhang for print without support. The screen angle is 45 degrees. 🚀✨…
Air inlet for Prusa MK3 and MK3S (MK3 needs a longer screw, M3x20) Print instructions Just print without support and in PETG/ASA/ABS and enjoy.
I really like https://www.prusaprinters.org/prints/54922-prusa-i3-mk3-90deg-air-inlet . Unfortunately it sticks out too much, and collides with my camera. So I made this. Print instructions Printed in Prusament PC Blend using standard…
Scalable NACA Air Inlet – Seamless Aerodynamic Integration Enhance airflow efficiency with the NACA Air Inlet , designed for seamless integration into a variety of applications, from automotive hoods and body panels to RC aircraft, UAVs,…
The duct is designed for the fan to elegantly sit on a desk without the need for any additional mounting structure. The fan is angled upward at 22.5 degrees to aim airflow your chest. The fan mounts to the duct with M4 screws, 30-34mm…
This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
Our cordless Makita blower kept sucking in my pants material while using. This bayonet cap fits into the inlet and stops this problem. I have also included the STL for just the bayonet cap section which fits the inlet and the outlet. In…
This stencil (or template) is used to locate and mark the location on a project box for adding a C14 power inlet socket (this is the female socket typically used for standard computer AC power cables). To use the template simply place it…
Here are my versions of the Fluval Flex inlet covers that give better coverage around the sides. These where made to fit the Fluval Flex 57L (15 gal) version, and I can't confirm if they fit the other sizes of aquariums. If you try them…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Looking for MORE upgrades for your enclosure? Consider…
Moved pass through more inline with outlets. Angled 45 to give better flow to my taste. I'm very new to designing stuff so not perfect but works fine for me
This is a mash up remix of StanleyB's and reddaugherty's respective models. I personally need the extra safety precaution that the grill provides.
This one goes by many names. Fishtail-Plant, Brittle Mermaid, Green Scorpion,... to name a few. The plant is said to have numerous medicinal applications. However, I have not yet been able to find anyone who did participate in medical…
This is an adjustable inlet nozzle for 80mm inlet. It is entirely print in place and requires no assembly and no additional supports for printing. Simply give the top half a good hard twist to break off all the integrated supports and…
Hidden brake cooling inlet ducts designed for a non-Nismo 06-09 350Z. These replace the sight shields, 62234-CF40A and 62235-CF40A, behind the front bumper and direct air to 2.5in hose inlets. Hoses can then be routed to the front brakes…
Replacement directional inlet nozzle from filtration for Intex pools. For better water flow in the pool. Printing: Material: PETG/ABS Supports: Yes
Description: This Y-Pipe Splitter allows you to easily utilize both the Bambu Labs AMS and the standard spool without PTFE tube disassembly. Background: Brandon's Over-Engineered Y-Splitter is fantastic, but the insert action on the inlet…
I designed this vacuum cleaner inlet to fit hose from WD series to my AD series vacuum cleaner which is smaller in diameter (45 mm). I bought replacement hose Jolly for Kärcher WD vacuum cleaners (see the picture) and wanted to use it on…
This remix of the Voron V0.2's Power Inlet Foot is completely unnecessary!^^ As the Voron Logo is on the back on the printer, you will most likely not see it. However… It includes a second body for the Voron Logo. It can be printed with…
The connection is about 27 mm and turns into about 25 mm, so it fits perfectly into Bestway pools. on the other side you can connect standard 32mm pool hose. Nozzle 0.4 Layer 0.2 Filling 100% Number of walls: 3 Supports: NO
This is an adapter for filling the water tank just insert an gardena-like adapter or print one (you'll find on printables). printed with PETG 15% infill 2-3 walls maybe slim-tree support for holding-nipples. I've printed that outside is…
Inlet Nozzle for LAY-Z-SPA connector (post 2019) that diverts the water flow to the side. This is just a re-upload of the original creation of CoquetTech which I found on thangs.com and want to use as a base for Remixes but it is not my…
Owners of the wonderful Royal Enfield Himalayan 411cc adventure motorcycle often fit DNA (washable) air filters to their bikes. One of the options from DNA Filters is a plain steel plate that holds the filter in place. In terms of ‘clean’…
When using the QIDI BOX with the QIDI Q2, a riser is included and the filament inlet on the riser is used instead. The original filament inlet on the Q2 becomes unused. This plug is designed to cover that opening to reduce heat loss from…
Hi Because I needed a mounting for the teflon tubes on my MMU 2 I made a wall bracket with numbering. You need: Printed parts ;-) 6x screws M3,0x12 and Nuts ALSO INTERESTING Happy printing MFG Chris Follow me on... prusaprinters.org…
I had a Shaffner FN284-10-06 filtered inlet in stock, so I decided to use this for my Voron 2.4R2 build. Hence, I made this part.
Waterfall designed for integration into pond systems with a 32mm inlet. I've used this as a solid structure (with the lid) to integrate into a PUR shaped cascade waterfall. But you can use it for everything ofcourse. I've printed in ABS…
Replacement inlet deflector for your Shop-Vac vacuum cleaner. Do not print in model orientation. Rotate it 90° so the plate is vertical. The deflection cup will be stronger. Use a good brim and supports under the cup and inside the hose…
Simple cap to block off the 2nd inlet port for the pool pump. We found this necessary to get the skimmer accessory to work properly. There just wasn't enough suction with both inlet (Intex oddly calls them outlets) ports in use. You could…
Needed an adapter for the pool of our friends. The standard adapters are just too big, so i cutted all above the screw thread and redesigned the smaller tube. With this adapter it's possible to connect e.g. an Intex Deluxe Auto Pool…
Bob dishwasher funnel for easier re-filling of water
A basic floor drain cover (for balcony, bathroom, patio etc) for Φ80mm drain with Φ17mm hose inlet for AC drain hose that I made out of necessity. The inlet is inclined to assure proper drain of AC hose water and it also has holes in the…
The look of the MSA Millennium gas mask is lovely, but I don't like the empty ports on the side. I don't need big expensive filters or bulky replica ones, so I made these inlet covers for the aesthetic. Both designed to print without…
A flared out inlet profile for a 120mm PC fan
Remix of the V2 Delta-P duct rotating the inlets to even the airflow. For installation details detail see original model by teookie. STEP file included. Print in ABS/ASA with 4 perimeters, no supports needed.
Convert your midea duo to use a 5.9" hose for the inlet. Use aluminum tape to secure it to the hose. Use the included foam that came with your AC to block the outlet hose gap.
I've completely re-evaluated the ball's trajectory. As a result, the Drop Inlet's launch speed has apparently increased, but the Randomizer Inlet's launch speed has seen a more significant improvement! Previous ver. of Drop Hole Inlet :…
A simple adapter to connect a 50mm (two inch) shopvac style vacuum cleaner to any tool with a 38mm (one and a half inch) tapered connector. Shown is a Makita Sliding Compound Mitre Saw. Print upright, threaded side down - no supports are…
Needing a quick fix for my 20 year old Karcher K2.99, I quickly modelled a replacement inlet elbow (part number 9.036-704) as I couldn't find one available online at the time. I've since discovered that 9.037-138.0 is a compatible…
Enderwire Stock Power Inlet modded to fit the parts of my Ender 3 v2. For Power Inlet Huaconn HC-99-F1 and Rocker Switch Huaconn HS9-C2 from stock Ender 3 v2
A simple adapter to connect a two inch shopvac style vacuum cleaner to any tool with a one inch tapered connector. Shown is a Makita Random Orbital Sander - I have included a small bend in the fitting to allow for clearance when using…
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…
This is a custom 3D-printed air intake elbow and turbo inlet adapter, specifically designed for BMW diesel engines that use the oval intake manifold port (most notably the M47 and M57 engines). Although it was originally designed around…
I optimized my old 90° Air Inlet: reduced thickness of the walls for less weight the inlet is now wider for better airflow The screws of the fan should be replaced with 2mm longer ones Printer Brand: Prusa Printer: i3 MK3S+ Rafts: no…
This is a remix Meanwell UHP-350-24V power supply mount designed to attach to the Ratrig V-Minion 3D Printer from JP3d . These brackets fit the Meanwell UHP-350-24V power supply in combination with the XP Power FGSM inlet for Ratrig…
Remix of ShopVac Diffuser by renobot ( https://www.thingiverse.com/thing:1182596). I have a Ridgid WD4070 and wanted to add on a clip and make the connector fit well. I will admit that printing vertical is not best for the clip part since…
Angled pool inlet nozzle to replace the standard ball. Outer diameter ball: 41mm Inner diameter opening 30mm Printed with eSUN PLA+, until now everything is fine and no degradation.
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
This is a remix of the URBI and another split remix to provide split versions of most options, so that they can all be printed on the V0 without needing a larger printer. These should be printed in ABS or a similar appropriate filament,…
Single 5015 fan inlet for EVA 3 with a slight angle for use with a toolboard. Heavily inspired by very similar model , but it was designed for a slightly different fan and didn't have source files. It's not necessary, but I recommend…
Its put together with M3 screws and nuts. For more stability i added 2x15mm bolts. Here you can also use something else. You might to have sand down an edge or two dependig on the fit to you box.
Grid air inlet window I wanted to create an air inlet limiting the incoming sounds. For this, I created a wave system, which has the role of breaking the incoming sound, due to the rebounds of the sound waves, while letting the air pass.…
Voron Trident Power inlet CW2B
Noctua fans are fantastic, however, not very budget friendly. A very close competitor for PC case fans is Arctic, specifically, the Arctic P12. I happened to have these fans installed in my rig and decided i wanted to try out Noctua's…
Got frustrated filling my RV and travel trailer with anti-freeze for some winter usage. Hard to get a normal funnel at a decent angle, and having a guide for the jug to line up with helps a lot. FreeCad and a Prusa Printer to the rescue.…
NACA based air inlet (duct). Size can be adapted by scaling the STL-File. Inlet width: 18.5mm, length: 37.3mm. Inlet hight: 3.3mm. Works great for motor cooling of RC gliders. Retrofitting on existing fuselages possible.
Hey guys, so in the last few days I have designed and successfully tested an air inlet/outlet which I will use in my 3d printer enclosure for controlling the amount of fresh (and cooler) air coming into the enclosure by sending a signal…
Holder / Inlet for 4mm (Chihiros) fertilizer dosing tubes. Aquarium glas 6, 8, 10 ans 12mm. Feel free to ask for other. For 1 to 6 tubes.
Designed like my Core One version, this is a more rugged vent to mount on the back of your Centauri carbon. Unlike the Core Ones nice bolt pattern on the back, the Centauri Carbon has a wonky 3 bolt design for mounting, which poses a…
The original URBI (Upper-Rear Bowden Inlet) is great, but unfortunately does not fit on a V0 bed for printing. As this should ideally be printed with ABS, of you only have a Voron V0 you were not able to print this. I have split the model…
All credit goes to @wociscz for his excellent design. Thread is matching nice and smooth after upscale.
The original model is almost perfect. But I have encountered that sometimes the filament binds a bit at the entrance to the channel. This has not caused me any problems so far, but to completely eliminate their possibility, I made…
Some more gas mask inlet parts, aesthetic covers for otherwise bare openings. Optimized for 0.6mm nozzle, should be fine with 0.4mm as well. No supports needed. Models in photos printed at 0.2mm layer height. General disclaimer: Use at…
Inlet for iPhone 12, 13, 14 "Standard-Size" and 12, 13, 14 Pro so those phones are not sliding around in the wireless charging cradle and remain in the position where the wireless charging coils lign up. Currently this model is only for…
This adapter is used to reuse the fans for the intel cpu supplied with the processor and not used due to replacement with better cooling systems (arctic noctua etc). Two versions available: inlet and outlet. Instructions: a.) check the…
Designed for Noctua 140x25mm fans, these spacers can improve acoustics and performance in suction or “pull” type applications. Read more from the original Noctua design:…
Sleek, sexy, and ready for printing. Aesthetic intakes for shallow NATO 40mm threaded connections. Print threads pointing up. This and more also available fully printed and shipped: https://order.jan-asleep.com
Replacement intake strainer to prevent filter from sucking up shrimp and small fish. Double height for more flow.
These are female threaded inlet and outlet made for Dronnn's cyclone separator. https://www.thingiverse.com/thing:2829268 I chose to go with female threads since it offered more flexibility for the oddball collection of hoses that I have…
I did my own inlet since i sleeved the cards and they wont fit anymore whith their new height. The model has a dimension of 253x 253 x 40. I provieded to models one is a onepiece and the secondd one is split so that you can print it on…
Recommend printing with TPU - allows for a slight flex when connecting to hoses and piping.
Here is a J1772 dummy inlet to plug your charging plug into when not in use. There are a few others on Thingiverse, so just choose whichever works for you :). Instructions You should probably print with at least 50% infill to handle any…
This is a small plug I designed to use for the dual-intakes commonly found on newer Intex-style pools. I printed two of these to use when disconnecting the pump/filter for maintenance, etc. I also plan to use one to block one of the…
Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 10-20% Filament: AddNorth PLA
Inlet logos and covers for gas masks. Untested. Print rings with threads pointing up. Print covers with open side up, “face” down. Shouldn't need supports in general, but I haven't tested the thicker logos yet. Those might need some…
Mount an IEC C14 (kettle lead) in-let switch to 2020 extrusion. This model can be useful if you've moved your PSU outside an enclosure. See my companion model to mount a Meanwell LRS power supply on 2020 aluminium extrusion. Hardware 2 x…
Someone asked in the comments of the original skimmer adapter (https://www.thingiverse.com/thing:3701193) for a right angle option. I liked the way matlen67 handled the problem of aiming the angled nozzle since you can't guarantee where a…
This bracket was originally designed by audiorazor, and allows for the installation of PTFE tubing into the Palette 3, and 3 Pro. I personally was having problems with my filaments pulling themselves out of the Palette just because of the…
