Visual Garage Parking Assistant, no supports

printing without supports

A simple, practical visual parking assistant for garages. Mount it on a wall, shelf, or side surface where it is visible from the driver’s seat. As you slowly drive into the garage, the orange alignment markers appear offset at first. When the car reaches the correct parking position, the markers visually line up into one continuous line — that is your stop point.

This is a fully mechanical, passive parking aid. No electronics, no batteries, no sensors, and no wiring required. It is especially useful in narrow garages, shared garages, or parking spots where you need to stop in the same place every time.

The model is provided as a free 3MF file and is designed for easy 3D printing.

Features:

• Visual alignment system based on driver perspective

• No electronics or calibration required

• Helps park in the same position every time

• Compact wall-mounted design

• Works with cars, vans, and garage storage layouts

• Easy to print and install

• Great for tight garages and repeatable parking

How to use:
Print the model, mount it on the side wall of your garage at a height visible from the driver’s seat, then park your car in the ideal position. Adjust the assistant until the orange markers line up from your normal driving position. After that, simply drive in slowly and stop when the markers form one straight line.

Suggested print settings:

• Material: PETG or PLA

• Layer height: 0.2 mm

• Infill: 15–25%

• Color: black body with orange alignment markers

• Mounting: double-sided tape or screws, depending on your surface

• printing without supports