Alice's Garden Trampoline - Heavy Duty Net Pole Cap Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy-duty 4mm pole cap replacement for Alice's Garden 250 trampoline. Stronger than original. Print in PETG/ASA.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 1
- Views
- 25
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a heavy-duty replacement cap for the safety net enclosure poles of the Alice's Garden 250 trampoline (compatible with other models using the same pole structure).
The original factory-injected plastic caps are prone to snapping under the constant tension of the fiberglass ring and UV exposure. I designed this heavy-duty version from scratch to fix that specific issue once and for all.
Upgraded Design: While the original stock cap is only 2mm thick, this reinforced design features a 4mm wall thickness, doubling the structural material to easily withstand the lateral forces and tension from the safety net without flexing or bending.
Recommended Print Settings:
To ensure maximum durability outdoors and prevent splitting along layer lines:
Material: ASA (highly recommended for ultimate UV and weather resistance) or PETG (use dark colors like black for better UV protection).
Wall Loops (Perimeters): 5 or 6 (Crucial! This ensures the doubled 4mm walls are printed as a solid, continuous shell instead of relying on weak infill).
Infill: 40% Gyroid (for uniform multi-directional strength).
Orientation: Print it upright (resting on its circular base) for the best structural integrity and clean overhangs.
Cooling: Keep the part cooling fan low (10-20% for PETG, off/minimum for ASA) to maximize layer adhesion.
License
This model is shared under the Creative Commons — Attribution — Noncommercial — Share Alike license. Feel free to print it for personal use and repairs!