Parking Clock Disc/Parkimiskell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully 3D-printed parking disk for single-color filament. Features snap-fit hands. No extra hardware or tools needed.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The clock face features bold, embossed numbers and indicators, making it easily readable even when printed with a single-color filament. I recommend printing the hands in a different color for better contrast, but a single color works fine too, as the hands are thick enough to cast visible shadows.
I have included clock face models with Estonian text, English text, and a blank version with no text. The Estonian text is a direct translation of the English version.
The hour and minute hands attach to the clock face using a press-fit mechanism. When attaching the minute hand, start by inserting it at a 45-degree angle to slightly compress the clip. Once it is partially in the hole, straighten it out and push it straight down to avoid breaking the stem. Ensure it is fully seated at the bottom and securely locked in place on the back side.
My Print Settings:
Materials: Silk PLA for the clock face, PETG for the hands.
Clock Face: 0.1 mm layer height, 4 top/bottom shells, 30% infill, and a skirt.
Hands: 0.12 mm layer height, 4 top/bottom shells, 38% infill, and a skirt.
Note: The settings I used are probably overkill, so feel free to try a standard 0.2 mm layer height with 20% infill.