Counting matching models…
This is a mechanical digital 24-hour clock. It is driven by a single motor (or by hand) and uses geneva drives and camshafts to display the correct patterns on four mechanical seven segment displays. Non-printed parts 46x Square M3 nuts…
Printing and adding to your used PET bottle and watering your plants is easy. Update 3/19/2022: Added file with brim for those having bed adhesion issues. Update 3/22/2022: I added a file with a brim and spike with only one hole.
An interpretation of Lt. Uhura after hours. Print instructions Category: People
Introducing a mechanical digital clock with numbers strangely arranged. Technical highlights Usually, intermittent motion mechanism such as Geneva drive is necessary to decrease the number of the motors of mechanical digital clock.…
Hush House is a library from the game Book of Hours, located on Bancrug Isle of the Cornish coast. As a Library of the Watchman's Tree, its purpose is to preserve otherwise forbidden knowledge. Dimensions Length Width Height 155mm 96mm…
Do you want to get your 5 million watch hours reward earlier? Plaque is press fit I printed the model right way up, but its probably quicker to print it upside down. Right way up, and upside down gcodes are with support
🕰 Insert Puzzle – Educational Clock for Children This educational model is designed as a clock-shaped insert puzzle to help children learn how to tell time in a playful and engaging way. Each piece represents one hour on the clock face…
Time Lapse video link: This is NOT recommended as a first print. Take a look around at the several other remixes and decide which one you want to tackle. There is a lot of excellent information in all of them. I have built one of these…
A desk clock with retrograde minutes and jumping hours mechanisms. Retrograde minutes : The minute hand moves not rotational but reciprocal Jumping hour : Numerical hour display that changes instantly largest part size : 174 x 99mm How to…
Just the Roblox hours Ronin drifters katana for Easy13 just for fun :)
its to be printed at 0,2 layer height. there are 3 base layers (be carefull, differnet slicers gave me differrent layer numbers even with the same layer height), and 2 letter/image layers. you should change filament colour at the begining…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
this is my longest print ever. My printer works only by 10mm/s. I am not able to print faster as 10mm/s. I would like to print more Covid Masks. But it takes a long time for only this two pices.
Printed with 0.2 layer height, no special settings. You can hide the seam on the sleeve by placing it on the back.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is from Roblox and from one of the bosses if you would like to check the game its called Hours if you can't find the game here is a link: https://www.roblox.com/games/5732973455/HOURS (this is the game) This is my first ever…
An OpenSCAD script to generate a store hours sign. Use filament change option in slicer to change color.
Synček je v 2 ročníku ZŠ a zrovna preberali hodiny. Tieto môžu slúžiť na nácvik, ale aj ako počítadlo skóre pri rôznych hrách. Všetko okrem hriadeľky a závlačky som navrhoval pomocou https://www.tinkercad.com/ Hriadeľku a závlačku som si…
Couldn't find a horizontal wall holder for this Lego car so I made one. needs 2 screws to hold it up. Depending on which way you want it facing hook it in one of the circled areas. This is more a standoff holder for a technic bar. It…
EN | Remodeling timetable This school schedule is 100% re-arrangeable, you can take the pieces out at any time and straighten them according to the new arrangement of timetable without having to cross out or erase anything. Instructions…
Important: All parts are sliced with G-code ready for PETG printing. The pin is an optional print and can be used in place of a M3 x 16 screw. Do note the fitment of this part will be tight and it may needed to be sanded as it was meant…
I used a lot of the principles of frisbees for the body of the aircraft and the wings took a bit of finessing but I think overall its a decent design for never making a flying object before this.
I made this to count down the hours to new years starting at 10 pm, you will need to print the Prusa Count Down Tablet, and Marble Table. Infill - 15% Supports - NO
Racket based on mixed sourced but ending on 103 cm bore length with nominal unit spacing on bore holes tuning with 6 mm bore. its pretty small and pretty awesome. . Print in PLA and I tested with 25% infill but depending on your preffered…
If you have tried any VR headset, you would probably know how much fatigue you get with long hours of play, or maybe after 10 minutes of play! which end up with lot of people neglecting their VR Headsets for years. with this shoulder…
pls lifke and follow
An OpenSCAD script to generate a store hours sign. Use filament change option in slicer to change color.
3D Model of the mask The Weeknd wore from his concert
Desk or wall clock using Bambu Lab Kit-011. Can be printed in colors by adding 3 pauses in the slicer. (Pauses are added by moving the slicer preview to the desired slide then right-clicking the slide button, is best to watch a video…
Scaled to a average arm size
Made this hours sign for a store I help out in, just add text using the text tool. When adding text make it flush and 1mm thick. This is double sided. 4mm thick total, 1mm multi colour then 2mm solid colour and 1mm solid. I printed in…
the model includes 4 holes at the bottom if u wanna hot glue rubber to the holder
Officer K's (Ryan Gosling) production-made wooden horse from the orphanage in BLADE RUNNER 2049. In this print, there are two horses; the one with the bent front leg is a sculpture of a concept maquette made for the production as a test.…
Description Show off your 3d-print hours with this trinket coin, stand included. The coins are sorted in different print profile, with the amount of digits, and the specific number on different plates. The different parts of the coin is…
the mini golf was my first project so please take it with a grain of salt
Template for making DYI clock faces, from 50mm to 250mm diameter, with holes for marking places for hour markers. ( this is printable in BambuLab 256x256 bed size)
DIY Print Bed Filament Dryer PLA+ 55C 4hours added G28 W ; home all without mesh bed level to the G code like this G90 ; use absolute coordinates G28 W ; home all without mesh bed level G1 X100 Y200 Z200.0 F720 ; move x-axis to top to…
DIY Print Bed Filament Dryer PETG 65C 4hours added G28 W ; home all without mesh bed level to the G code like this G90 ; use absolute coordinates G28 W ; home all without mesh bed level G1 X100 Y200 Z200.0 F720 ; move x-axis to top to…
To learn Fusion and prusaSlicer, I created my own fast printing multicolor infill switches. The labels are not good to print/read and needs some improvement… Print instructions 0.2mm layer height PLA 0% Infill 3mf file with two color…
With the new year so close, I wanted to keep track of the number of hours until midnight on 1/1/2024, so I designed this sleek and compact (easily scalable) model to help me do just that. I made the design modular on purpose so that on…
