1 / 4
Maentum (Plugin Festival) IceCube Lid Spacer — image 1
1 / 4

Maentum (Plugin Festival) IceCube Lid Spacer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keep your Maentum IceCube lid cracked open with magnets to prevent mold and stay secure while driving in your camper/car

Rating
0 / 5
Likes
3
Downloads
3
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

Description

A simple and effective spacer for the Maentum (Plugin Festival) IceCube lid. It keeps the lid slightly open when the cooler is not in use, allowing airflow to keep the interior dry and prevent mold.

Equipped with holes for 20x3mm round magnets, the spacer securely aligns with the icebox's built-in magnets. This ensures the lid stays firmly in place and won't rattle or fly open while driving in a car or camper.

Assembly Instructions

  • Magnets: Requires two 20x3mm round magnets.

  • Orientation: Double-check the magnetic polarity against your icebox before gluing.

  • Adhesive: Secure the magnets in place using a drop of superglue.

Print Settings

  • Orientation: Printed on its side (as shown in the pictures) for the best structural strength.

  • Infill: 20%

  • Supports: Tree supports are recommended to ensure the magnet holes print cleanly.

  • Material: Standard PLA  or PETG works fine for home use. If you plan to use it in a vehicle or camper, ASA is highly recommended to withstand high cabin temperatures.


OneShape Link: https://cad.onshape.com/documents/c4c02297842b2e043bd1c95e/w/e27bd3057cf2566a5044e8ff/e/e4a2e3c6ab4446febfa1a674?renderMode=0&uiState=6a4bcdc023a791259ef0e354

Tags